HS0005KCU04H Renesas Electronics America, HS0005KCU04H Datasheet - Page 100

• Manufacturer Part Number: HS0005KCU04H
• Description: EMULATOR E10A-USB SUPERH RISC
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of HS0005KCU04H

• Contents: Emulation Module
• For Use With/related Products: SH7205, SH7265
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Items that can be displayed in the sheet are listed below.
[Mode]
[Step option]
[Reset assert (Auto Connect)]
Note: Includes the interrupts during a break.
Do not to use the [Reset assert (Auto Connect)] option unless the
Note: The items that can be set in this dialog box vary according to the emulator in use. For
Rev. 2.00 Nov. 19, 2009 Page 78 of 294
REJ10J1766-0200
port connector is properly connected as shown in Section 1.5,
Recommended Circuit between the H-UDI Port Connector and the
MPU of the additional document, ″Supplementary Information on
Using the SHxxxx″. Using the [Auto connect] option without the
proper connection will damage the user system.
details, refer to the online help.
Displays the CPU number.
Sets the step interrupt option.
Disable interrupts during single step execution: Disables
interrupts
Enable interrupts during single step execution: Enables
interrupts during step execution.
[CPU reset] function or [Reset after execution] function is used,
the reset signal is generated by the emulator.
When the emulator is connected to the host computer and the
CAUTION
*
during step execution.