HS0005KCU04H Renesas Electronics America, HS0005KCU04H Datasheet - Page 267

• Manufacturer Part Number: HS0005KCU04H
• Description: EMULATOR E10A-USB SUPERH RISC
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of HS0005KCU04H

• Contents: Emulation Module
• For Use With/related Products: SH7205, SH7265
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

• Click the [OK] button.
• The first point display in the State line changes from Disable to Enable.
• The first point display in the Condition line changes from None to Address =
• The first point display in the Action line displays as Break).
• Set the program counter and stack pointer values (CPU0: PC = H’00000800, R15 =
• If program execution is failed, reset the device and execute again the procedures above.
The program runs and then stops at the condition specified as Break Condition 1.
H’0000108C (tutorial.cpp/45).
H'00010000 and CPU1: PC = H’00100800, R15 = H'00110000) that were set in section 7.9,
Setting Registers, in the [Register] window of the High-performance Embedded Workshops
for CPU0 and CPU1. Click on the [Go] button of the High-performance Embedded Workshop
for either CPU0 or CPU1.
The internal RAM area differs depending on the MCU. Refer to the hardware manual of the
MCU used.
Rev. 2.00 Nov. 19, 2009 Page 245 of 294
REJ10J1766-0200