HS0005KCU04H Renesas Electronics America, HS0005KCU04H Datasheet - Page 105

• Manufacturer Part Number: HS0005KCU04H
• Description: EMULATOR E10A-USB SUPERH RISC
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of HS0005KCU04H

• Contents: Emulation Module
• For Use With/related Products: SH7205, SH7265
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Items that can be displayed in the sheet are listed below.
[Loading flash memory]
[Erasing flash memory]
[File name]
[Bus width of flash memory]
[Flash memory erasing time]
[Entry point]
Sets Enable for flash memory downloading. At Enable, when
the flash memory is downloaded on the High-performance
Embedded Workshop, the write module is always called.
Disable: Not download to the flash memory
Enable: Download to the flash memory
Sets Enable for erasing before the flash memory is
programmed. At Enable, the erase module is called before
calling the write module.
Disable: Not erase the flash memory
Enable: Erase the flash memory
Sets the write/erase module name. The file that has been set is
loaded to the RAM area before loading to the flash memory.
Sets the bus width of the flash memory.
Sets the TIMEOUT value at flash memory erasing. Increase the
value if erasing requires much time although the default time is
three minutes. The values that can be set are as follows: D'0
(minimum) and D’65535 (maximum). Only positive integers can
be input.
Sets the calling destination address or access size of the
write/erase module. (It must be RAM address.)
All erasing module address: Inputs the calling destination
address of the erase module.
Writing module address:
address of the write module.
Access size:
RAM area that is used for loading the write/erase module.
Rev. 2.00 Nov. 19, 2009 Page 83 of 294
Inputs the calling destination
Selects the access size of the
REJ10J1766-0200