HS0AE4XEPI61H Renesas Electronics America, HS0AE4XEPI61H Datasheet - Page 28

• Manufacturer Part Number: HS0AE4XEPI61H
• Description: EMULATOR BASE UNIT AE4
• Manufacturer: Renesas Electronics America
• Type: Smart Cardr

Specifications of HS0AE4XEPI61H

• Contents: E6000 Emulator and CD-ROM
• For Use With/related Products: AE-4X
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Table 1.1 Memory Types
Memory Type
On-chip
User
Emulator
Note) "User" can not be set on this emulator.
The contents of a specified block of memory can be displayed using the Memory… function. The
contents of memory can be modified at any time, even during program execution, and the results
are immediately reflected in all other appropriate windows.
The emulation clock can be specified as any of the following frequencies: 1.7856 MHz, 2.4576
MHz, 3.5712 MHz, 4.9152 MHz, 6.78 MHz, 7.1424 MHz, 9.8304 MHz, or target clock. The
E6000 emulator works within the voltage and frequency ranges described in each MCU hardware
manual.
1.3.3
External probe 1 (EXT1) and external probe 2 (EXT2) can be connected to the E6000 emulator to
make use of any signal for braking or tracing. The probe 1 signal can be used as an event detection
system condition, depending on whether the level is high or low. Probe 2 outputs high-level
signals for use in triggering oscilloscopes, etc., when the condition for setting (1 to 4) the bus
monitor function is satisfied.
1.3.2
Clocks
Probes
Description
Accesses the MCU on-chip memory.
Accesses the memory on the user system.
Accesses the emulation memory.
5