HS0AE4XEPI61H Renesas Electronics America, HS0AE4XEPI61H Datasheet - Page 49

• Manufacturer Part Number: HS0AE4XEPI61H
• Description: EMULATOR BASE UNIT AE4
• Manufacturer: Renesas Electronics America
• Type: Smart Cardr

Specifications of HS0AE4XEPI61H

• Contents: E6000 Emulator and CD-ROM
• For Use With/related Products: AE-4X
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

The external probe interface circuit is shown in figure 3.13.
Figure 3.13 External Probe1 Interface Circuit
The trigger output is a low-level signal and is controlled by event channel 8. The trigger output is
available as either T5V (within the range from 2.5 V to 5 V; does not depend on the user Vcc
level) or TUvcc (the user system supply voltage level).
3.3.4
External Probe 2 (EXT2)/Trigger Output
A 6-pin connector, marked EXT2 (at the lower right of the user system interface cable connector),
on the E6000 emulator case accommodates four trigger outputs. The pin assignment of this
connector is shown in figure 3.14.
Figure 3.14 Connector for External Probe 2
The trigger output is a high-level signal and is output during read or write cycles when a trigger
which condition (1 to 4) of the bus monitor function is satisfied. The trigger output is available as
Vcc (user system power voltage level).
26