HS0AE4XEPI61H Renesas Electronics America, HS0AE4XEPI61H Datasheet - Page 35

• Manufacturer Part Number: HS0AE4XEPI61H
• Description: EMULATOR BASE UNIT AE4
• Manufacturer: Renesas Electronics America
• Type: Smart Cardr

Specifications of HS0AE4XEPI61H

• Contents: E6000 Emulator and CD-ROM
• For Use With/related Products: AE-4X
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.2.3
12
DEVICE=C:\WINDOWS\EMM386.EXE X= aaaa – bbbb
Here, aaaa is the upper four digits of Start value and bbbb is the upper four digits of End
value. For example, for the switch set to 6, you would set the line to read:
DEVICE=C:\WINDOWS\EMM386.EXE X=D800–DBFF
Add the following line to the [386enh] section in the SYSTEM.INI file:
EMMExclude= aaaa - bbbb
Here, aaaa is the upper four digits of Start value and bbbb is the upper four digits of End
value. For example, for the switch set to 6, you would set the line to read:
EMMExclude = D800-DBFF
Save the SYSTEM.INI file and exit the SYSEDIT.
Restart the host computer.
This ensures that Windows
the E6000 emulator and run the HDI to check communication to it.
Save the CONFIG.SYS file.
Modifying the SYSTEM.INI File
®
will not use this block of memory. You are ready to connect up