ZLP128ICE01ZEM Zilog, ZLP128ICE01ZEM Datasheet - Page 18

• Manufacturer Part Number: ZLP128ICE01ZEM
• Description: EMULATOR CRIMZON Z8 ZLP12840
• Manufacturer: Zilog

Specifications of ZLP128ICE01ZEM

• Interface Type: RS-232, Ethernet, USB
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 269-3829

UM018408-0408
Changing Crimzon ICE Settings
Follow the steps below to change the Crimzon ICE Settings:
1. Connect the serial port of the PC to the Crimzon ICE serial port using
2. Launch HyperTerminal on the PC by selecting Start
3. Enter the name for a new connection in the Connection Description
4. In the Connect To dialog, set the Connect Using drop-down menu to
5. A COM Properties dialog appears. Enter the following port settings
6. When the emulator is turned on or reset, a Crimzon ICE console boot-
the DB9-to-DB9 serial cable.
→
nection Description dialog box appears.
dialog box, and click OK to open the Connect To dialog box.
match the COM port to which the Crimzon ICE is connected. Click
OK.
and click OK. HyperTerminal should automatically attempt a connec-
tion. Otherwise, select Call
up message appears in the HyperTerminal. A typical boot-up message
is shown below:
ZiLOG Z8 LXM ICE
Firmware Version 2.0, Build (Aug 22 2005 08:14:37)
Copyright (C) 2005 ZiLOG, Inc. All Rights Reserved.
Adding emac driver...
Attempting to establish Ethernet connection.
10 Mbps Half-Duplex Link established
Bits per second
Data bits
Parity
Stop bits
Flow control
Accessories
→
Communications
57600
8
None
2
None
→
Connect.
Crimzon
→
HyperTerminal. The Con-
®
In-Circuit Emulator
→
User Manual
Programs
Introduction
14