ZLP128ICE01ZEM Zilog, ZLP128ICE01ZEM Datasheet - Page 36

• Manufacturer Part Number: ZLP128ICE01ZEM
• Description: EMULATOR CRIMZON Z8 ZLP12840
• Manufacturer: Zilog

Specifications of ZLP128ICE01ZEM

• Interface Type: RS-232, Ethernet, USB
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 269-3829

LED Indicators
External Interface Connectors
UM018408-0408
There are three sets of dual LED indicators on the Crimzon ICE, as
described below:
1. The dual ICE RUN LED on the front panel, see
2. The dual 3.3 V DC/1.8 V DC LED on the rear panel, see
3. The dual LAN/LINK LED on the rear panel, see
There are five external interface connectors (P8, P9, P10, J4, J5) on the
Crimzon ICE as explained below:
Panel
emulator is executing your system code. When the top LED is off,
emulation has stopped. If the bottom LED is ON, the emulator is not
functioning properly, contact technical support for assistance.
ICE Rear Panel
Both LEDs are normally illuminated when power is connected.
Panel
that the Ethernet connection is live. The LAN LED indicates that data
is being transferred across the connected network.
•
•
•
•
Connectors P9 and P10 are used to connect the emulator to the tar-
Connector J5 on the emulator front panel, see
The OTP Programming connector P8 is used to connect the emu-
Connector J4 on the emulator front panel (see
get pod and adapter board assembly, see
lator to the OTP programming module.
and
three pins.
provides access to the following functions:
on page 9, indicates emulator status. If the top LED is ON, the
on page 8, indicates Ethernet status. The LINK LED indicates
Figure 6
on page 8, indicates the status of internal voltages.
on page 9), provides a ground connection on all
Crimzon
®
Figure 1
In-Circuit Emulator
Crimzon ICE Front-
Crimzon ICE Rear
Figure 1
Figure 1
User Manual
on page 4.
Sample Project
Crimzon
on page 4,
on page 4
32