ZLP128ICE01ZEM Zilog, ZLP128ICE01ZEM Datasheet - Page 28

• Manufacturer Part Number: ZLP128ICE01ZEM
• Description: EMULATOR CRIMZON Z8 ZLP12840
• Manufacturer: Zilog

Specifications of ZLP128ICE01ZEM

• Interface Type: RS-232, Ethernet, USB
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 269-3829

UM018408-0408
Collecting Trace After an Event
5. Open the Trace window by selecting View
6. In the Trace window, click Clear Trace button.
7. To reset the Debugger click Reset button in the toolbar, or select
8. Click Go button or select Debug
9. When the program counter reaches
10. Click Get Frames to display the trace information.
The Trace and Event System is also used to capture trace data after an
event. Set up the events as described in
on page 22. In the Then: section, check Event Position in Buffer radio
button instead of Break. Use the slider bar to select the number of cycles
from the 64K buffer to be captured after the event.
When the event is detected, the selected number of cycles after the event
are collected. Execution stops after the cycles are collected. After the
event, selected number of cycles are left in the trace buffer.
Single-Stepping Through a Program
ZDS II provides a simple mechanism for single-stepping through a pro-
gram. Follow the steps below to single-step through a program:
1. Reset the program to
2. To step through the program one instruction at a time, use F11 or click
Trace.
Debug
match.
selecting Debug
ing Tools
tab and select the Reset to symbol ‘main’ check box.
Go
Into.
button in the Debug toolbar or select Build
→
→
Reset.
Options. In the Options window, select the Debugger
→
Reset. Set the Reset to
main()
by either clicking Reset icon or by
→
Using an Event to Stop Execution
Crimzon
0044
Go to run the Debugger.
, execution stops on event
→
main()
®
Debug Windows
In-Circuit Emulator
→
option by select-
User Manual
Debug
Sample Project
→
→
Step
24