ZLP128ICE01ZEM Zilog, ZLP128ICE01ZEM Datasheet - Page 39

• Manufacturer Part Number: ZLP128ICE01ZEM
• Description: EMULATOR CRIMZON Z8 ZLP12840
• Manufacturer: Zilog

Specifications of ZLP128ICE01ZEM

• Interface Type: RS-232, Ethernet, USB
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 269-3829

IR Development Board Operation
UM018408-0408
Applying Power to the Board
Enabling the Universal Remote Control Feature
For information on Schematics for IR development board, see
on page 60.
Three-digit codesets enable the IR development board to be used as a
remote controller for a variety of devices. The codeset tables are provided
in
Insert the two AAA batteries supplied with the kit into the battery holder
on the bottom of the IR development board and set the Battery Power
switch to the ON position.
You can also apply an external 3.0 V DC power supply to the board
between terminals J7 (Vbat) and J8 (Gnd). (The board supports a voltage
range of 2.0 V DC to 3.6 V DC. Match ZDS II project settings to ensure
proper operation.)
Follow the steps below to enable a universal remote control:
1. To change a device (device can be TV, VCR, CABLE, SAT, and so
2. To change a code (CODE is the three-digit number for the code
3. Release the device key. LED D2 is ON.
4. Press and release the three digit keys one by one. LED D2 stays OFF
Appendix B–Codesets
forth), press and release any device key (for example, a TV, VCR,
CABLE or AUX1).
selected from
and hold the device key for three seconds. LED D2 stays ON for three
seconds and then turns OFF.
when pressing a key and ON when the key is released.
Table 8
on page 42.
on page 42 through
Crimzon
Table 11
®
In-Circuit Emulator
on page 58), press
User Manual
Sample Project
Schematics
35