HW-XGI-VIDEO-US Xilinx Inc, HW-XGI-VIDEO-US Datasheet - Page 41

• Manufacturer Part Number: HW-XGI-VIDEO-US
• Description: DAUGHTER CARD VIDEO I/O VIODC
• Manufacturer: Xilinx Inc

Specifications of HW-XGI-VIDEO-US

• Lead Free Status / RoHS Status: Lead free by exemption / RoHS compliant by exemption
• Other names: 122-1506; HW-XGI-VIDEO-US

DVI/VGA Output Interface
Overview
Video Input/Output Daughter Card
UG235 (v1.2.1) October 31, 2007
R
The VIODC supports both digital and analog outputs over the DVI output connector. The
interface supports standards up to UXGA (165 MHz pixel clock). By connecting a VGA to
the DVI adapter to the DVI output connector, VGA output is also supported.
Figure 5-1
Instruments TFP410 IC is used to generate the digital DVI interface. An Analog Devices
ADV7123 triple DAC is used to generate the analog VGA compatible video signals. Both
devices are connected to a common 30-bit digital video bus carrying RGB data, HSYNC
and VSYNC. Independent pixel clocks are routed the devices. The triple DAC supports 10-
bit/channel RGB video. DVI interface supports only 8-bit/channel video, and the video
data ports are connected to the 8 MSBs of the video data bus. The DVI interface also
requires a data enable to distinguish active video from inactive video pixels.
The TPF410 is configured via as I2C bus interface. The DAC requires no configuration.
An I2C bus called DVI_OUT_DDC_SDA,SCL is routed from the XCV2P7 FPGA to support
an I2C EPROM on the DVI output interface.
10-bit RGB Digital
Video, Pixel Clock
XCV2P7
FPGA
shows a block diagram of the DVI and VGA output subsystem. A Texas
Figure 5-1: DVI/VGA Video Output Interface Block Diagram
www.xilinx.com
DAC VGA
ADV7123
DVI Input
TFP410
Output
Triple
Digital Video
Serial DVI
Signals
VGA Compatible
Analog RGB Video
+
hsync, vsync
Chapter 5
DVI Output
Connector
ug235_ch5_01_121905
41