FS-9017 Digi International, FS-9017 Datasheet - Page 44
![no-image](/images/manufacturer_photos/0/1/193/digi_international_sml.jpg)
FS-9017
Manufacturer Part Number
FS-9017
Description
JTAG-BOOSTER FOR PPC405XXX 3.3V
Manufacturer
Digi International
Series
Digi/FS Forthr
Type
FLASHr
Datasheet
1.FS-9017.pdf
(62 pages)
Specifications of FS-9017
Contents
Programmer and Associated Interface Software
For Use With/related Products
IBM PPC405xxx, 3.3V
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
2.5.
Usage:
The specified file is programmed to an I²C-Device (i.e. a serial EEPROM)
connected to pins of the CPU. Finally a complete verify is done. If the verify fails,
the contents of the I²C-Device is written to a file with the extension DMP.
Two methods to connect the I²C-Device to the CPU are supported. The first
method is to use two CPU pins, one pin for clock output (I2CCLK) and one pin
for serial data input and output (I2CDAT). The second method is to use one pin
for clock output (I2CCLK), one for serial data input (I2CDATI) and one for serial
data output (I2CDATO).
Options:
/I2CBIG
Specify this option if there is a device which needs a three byte address instead
of a two byte address.
This option must be the first option after the filename.
/DEVICE-BASE=hhhhhh
This option specifies an I²C device starting address. The default values are
chosen to access an serial EEPROM.
Default:
Default:
/OFFSET=hhhhhh
The programming starts at an offset of hhhhhh relative to the start address of
the I²C-Device.
Default:
Abbreviation:
/FILE-OFFSET=hhhhhh
If FILE-OFFSET is specified, the first hhhhhh bytes of the file are skipped and
not programmed to target.
Default:
Abbreviation:
44
Program an I²C-Device
JT405xxx /PI2C filename [/I2CBIG] [optionlist]
/DEVICE-BASE=5000
/DEVICE-BASE=500000
/OFFSET=0
/O=
/FILE-OFFSET=0
/FO=
(if option /I2CBIG omitted)
(if option /I2CBIG specified)
JTAG_PPC405a.doc