EP9315-CB Cirrus Logic Inc, EP9315-CB Datasheet - Page 345

• Manufacturer Part Number: EP9315-CB
• Description: IC ARM920T MCU 200MHZ 352-PBGA
• Manufacturer: Cirrus Logic Inc
• Series: EP9r

Specifications of EP9315-CB

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 200MHz
• Connectivity: EBI/EMI, EIDE, Ethernet, I²C, IrDA, Keypad/Touchscreen, PCMCIA, SPI, UART/USART, USB
• Peripherals: AC'97, DMA, I&sup2:S, LCD, LED, MaverickKey, POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 3.6 V
• Data Converters: A/D 8x12b
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 352-BGA
• Processor Series: EP93xx
• Core: ARM920T
• Data Bus Width: 32 bit
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: EDB9315A-Z
• For Use With: 598-1144 - KIT DEVELOPMENT EP9315 ARM9
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: No
• Other names: 598-1261

DS785UM1
RxFCE1:
RxFCE0:
BCRC:
SRxON:
RCRCA:
RA:
PA:
BA:
MA:
Copyright 2007 Cirrus Logic
Rx Flow Control Enable, bit 1. Setting the RxFCE1 bit
causes all receive frames that pass the Individual Address
[1] register to be scanned for flow control format and, if
detected, the Transmit Flow Control Timer register is set
appropriately.
Rx Flow Control Enable, bit 0. Setting the RxFCE0 bit
causes all receive frames that pass the Individual Address
[0] register to be scanned for flow control format and, if
detected, the Transmit Flow Control Timer register is set
appropriately.
Buffer CRC. When set, the received CRC is included in
the received frame buffer, and the received frame length
includes the four byte CRC. When clear, neither the
receive buffer nor the receive length includes the CRC.
Serial Receive ON. The receiver is enabled when set.
When clear, no incoming signals are passed through the
receiver. When a frame is being received, and SerRxON is
cleared, then that receive frame is completed. No
subsequent receive frames are allowed until SerRxON is
set again.
Runt CRC Accept. When set, received frames, which pass
the destination address filter, but are smaller than 64
bytes, and have a CRC error are accepted. However, the
MAC discards any frame of length less than 8 bytes. When
clear, frames received less that 64 bytes in length with
CRC errors are discarded.
Runt Accept. When set, received frames, which pass the
destination address filter, but are smaller than 64 bytes,
with a good CRC, are accepted. However, the MAC
discards any frame of length less than 8 bytes. When
clear, frames received less that 64 bytes in length, with a
good CRC are discarded.
Promiscuous Accept. All frames are accepted when set.
Broadcast Accept. When set, received frames are
accepted with all 1s in the DA.
Multicast Accept. When set, received frames are accepted
if the DA, when hashed, matches one of the hash table
bits, and the frame is a multicast frame (first bit of
destination address = 1). See Descriptor Processor
Transmit Registers.
1/10/100 Mbps Ethernet LAN Controller
EP93xx User’s Guide
9-43
9