HD64F3437TFI16V Renesas Electronics America, HD64F3437TFI16V Datasheet - Page 364

no-image

HD64F3437TFI16V

Manufacturer Part Number
HD64F3437TFI16V
Description
MCU FLASH 60K 100-TQFP
Manufacturer
Renesas Electronics America
Datasheet

Specifications of HD64F3437TFI16V

Lead Free Status / RoHS Status
Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
HD64F3437TFI16V
Manufacturer:
Renesas Electronics America
Quantity:
135
Part Number:
HD64F3437TFI16V
Manufacturer:
Renesas Electronics America
Quantity:
10 000
14.4
14.4.1
The host interface can request two interrupts to the slave CPU: IBF1 and IBF2. They are input
buffer full interrupts for input data registers IDR1 and IDR2 respectively. Each interrupt is
enabled when the corresponding enable bit is set (table 14.8).
Table 14.8 Input Buffer Full Interrupts
Interrupt
IBF1
IBF2
14.4.2
In slave mode (when HIE = 1 in SYSCR), three bits in the port 4 data register (P4DR) can be used
as host interrupt request latches.
These three P4DR bits are cleared to 0 by the host processor’s read signal (IOR). If CS
are low, when IOR goes low and the host reads ODR1, HIRQ
and HA
generate a host interrupt request, normally on-chip software writes 1 to the corresponding bit. In
processing the interrupt, the host’s interrupt-handling routine reads the output data register (ODR1
or ODR2), and this clears the host interrupt latch to 0.
Table 14.9 indicates how these bits are set and cleared. Figure 14.3 shows the processing in
flowchart form.
Table 14.9 Host Interrupt Set/Clear Conditions
Host Interrupt
Signal
HIRQ
HIRQ
HIRQ
332
11
1
12
(P4
(P4
(P4
0
are low, when IOR goes low and the host reads ODR2, HIRQ
Interrupts
IBF1, IBF2
HIRQ
4
3
)
5
)
)
11
Description
Requested when IBFIE1 is set to 1 and IDR1 is full
Requested when IBFIE2 is set to 1 and IDR2 is full
, HIRQ
Setting Condition
Slave CPU reads 0 from P4DR bit 3,
then writes 1
Slave CPU reads 0 from P4DR bit 4,
then writes 1
Slave CPU reads 0 from P4DR bit 5,
then writes 1
1
, and HIRQ
12
Clearing Condition
Slave CPU writes 0 in P4DR bit 3, or
host reads output data register 2
Slave CPU writes 0 in P4DR bit 4, or
host reads output data register 1
Slave CPU writes 0 in P4DR bit 5, or
host reads output data register 1
1
and HIRQ
11
is cleared to 0. To
12
are cleared to 0. If CS
1
and HA
0
2

Related parts for HD64F3437TFI16V