PIC12C671T-04E/SM Microchip Technology, PIC12C671T-04E/SM Datasheet - Page 405

• Manufacturer Part Number: PIC12C671T-04E/SM
• Description: IC MCU OTP 1KX14 A/D 8-SOIJ
• Manufacturer: Microchip Technology
• Series: PIC® 12Cr

Specifications of PIC12C671T-04E/SM

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 4MHz
• Peripherals: POR, WDT
• Number Of I /o: 5
• Program Memory Size: 1.75KB (1K x 14)
• Program Memory Type: OTP
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 4x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 8-SOIC (5.3mm Width), 8-SOP, 8-SOEIAJ
• For Use With: AC164312 - MODULE SKT FOR PM3 16SOIC309-1048 - ADAPTER 8-SOIC TO 8-DIP309-1047 - ADAPTER 8-SOIC TO 8-DIP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Connectivity: -

22.2
1997 Microchip Technology Inc.
Control Registers
bit 7:6
bit 5
bit 4:3
bit 2
bit 1
bit 0
Section 22. Basic 8-bit A/D Converter
Register 22-1: ADCON0 Register
bit 7
ADCS1:ADCS0: A/D Conversion Clock Select bits
00 = F
01 = F
10 = F
11 = F
Unimplemented: Read as '0'.
CHS1:CHS0: Analog Channel Select bits
00 = channel 0, (AN0)
01 = channel 1, (AN1)
10 = channel 2, (AN2)
11 = channel 3, (AN3)
GO/DONE: A/D Conversion Status bit
If ADON = 1
1 = A/D conversion in progress (setting this bit starts the A/D conversion)
0 = A/D conversion not in progress (This bit is automatically cleared by hardware when the
ADIF
1 = conversion is complete (must be cleared in software)
0 = conversion is not complete
ADON: A/D On bit
1 = A/D converter module is operating
0 = A/D converter module is shutoff and consumes no operating current
Legend
R = Readable bit
U = Unimplemented bit, read as ‘0’
ADCS1
Note 1: For the PIC16C71, Bit5 of ADCON0 is a General Purpose R/W bit. For the
Note 2: For the PIC12CXXX devices, this bit is reserved. The ADIF bit is implemented in the
R/W-0
A/D conversion is complete)
(2)
OSC
OSC
OSC
RC
: A/D Conversion Complete Interrupt Flag bit
(clock derived from the internal A/D RC oscillator)
/2
/8
/32
PIC16C710/711/715, this bit is unimplemented, read as '0'.
PIR register. Use of this bit a a general purpose R/W bit is not recommended.
Always maintain this bit cleared.
ADCS0
R/W-0
W = Writable bit
—
U-0
(1)
R/W-0
CHS1
- n = Value at POR reset
R/W-0
CHS0
GO/DONE
R/W-0
ADIF / —
R/W-0
DS31022A-page 22-3
(2)
bit 0
ADON
R/W-0
22