MC68HC908GP32CP Freescale Semiconductor, MC68HC908GP32CP Datasheet - Page 329

• Manufacturer Part Number: MC68HC908GP32CP
• Description: IC MCU 8MHZ 32K FLASH 40-DIP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC68HC908GP32CP

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SCI, SPI
• Peripherals: LVD, POR, PWM
• Number Of I /o: 33
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 40-DIP (0.600", 15.24mm)
• For Use With: M68EVB908GP32 - BOARD EVALUATION FOR HC908GP32
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

20.13.5 CGND (Clock Ground)
MC68HC908GP32
MOTOROLA
•
MC68HC08GP32
When an SPI is configured as a master, the SS input can be used in
conjunction with the MODF flag to prevent multiple masters from driving
MOSI and SPSCK.
SS pin to set the MODF flag, the MODFEN bit in the SPSCK register
must be set. If the MODFEN bit is low for an SPI master, the SS pin can
be used as a general-purpose I/O under the control of the data direction
register of the shared I/O port. With MODFEN high, it is an input-only pin
to the SPI regardless of the state of the data direction register of the
shared I/O port.
The CPU can always read the state of the SS pin by configuring the
appropriate pin as an input and reading the port data register.
Table
CGND is the ground return for the serial clock pin, SPSCK, and the
ground for the port output buffers. It is internally connected to V
shown in
Note 1. X = Don’t care
SPE
0
1
1
1
20-3.)
Serial Peripheral Interface Module (SPI)
—
SPMSTR
Rev. 6
Table
X
0
1
1
(1)
20-1.
MODFEN
(See 20.8.2 Mode Fault
Table 20-3. SPI Configuration
X
X
0
1
Master without MODF
SPI Configuration
Master with MODF
Not enabled
Slave
Serial Peripheral Interface Module (SPI)
Error.) For the state of the
General-purpose I/O;
General-purpose I/O;
State of SS Logic
SS ignored by SPI
SS ignored by SPI
Input-only to SPI
Input-only to SPI
Technical Data
I/O Signals
(See
SS
as
327