MC912D60ACPV8 Freescale Semiconductor, MC912D60ACPV8 Datasheet - Page 271

no-image

MC912D60ACPV8

Manufacturer Part Number
MC912D60ACPV8
Description
IC MCU 6K FLASH 8MHZ 112-LQFP
Manufacturer
Freescale Semiconductor
Series
HC12r
Datasheet

Specifications of MC912D60ACPV8

Core Processor
CPU12
Core Size
16-Bit
Speed
8MHz
Connectivity
CAN, MI Bus, SCI, SPI
Peripherals
POR, PWM, WDT
Number Of I /o
68
Program Memory Size
60KB (60K x 8)
Program Memory Type
FLASH
Eeprom Size
1K x 8
Ram Size
2K x 8
Voltage - Supply (vcc/vdd)
4.5 V ~ 5.5 V
Data Converters
A/D 16x8/10b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Package / Case
112-LQFP
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
MC912D60ACPV8
Manufacturer:
FREESCALE
Quantity:
5 530
Part Number:
MC912D60ACPV8
Manufacturer:
FREESCALE
Quantity:
1 831
Part Number:
MC912D60ACPV8
Manufacturer:
QFP
Quantity:
748
Part Number:
MC912D60ACPV8
Manufacturer:
Freescale Semiconductor
Quantity:
10 000
Part Number:
MC912D60ACPV8
Manufacturer:
FREESCALE
Quantity:
20 000
MC68HC912D60A — Rev. 3.1
Freescale Semiconductor
RIE — Receiver Interrupt Enable
ILIE — Idle Line Interrupt Enable
TE — Transmitter Enable
RE — Receiver Enable
RWU — Receiver Wake-Up Control
SBK — Send Break
As long as SBK remains set the transmitter will send zeros. When
SBK is changed to zero, the current frame of all zeros is finished
before the TxD line goes to the idle state. If SBK is toggled on and off,
the transmitter will send only 10 (or 11) zeros and then revert to mark
idle or sending data.
0 = RDRF and OR interrupts disabled, RAF interrupt in WAIT mode
1 = SCI interrupt will be requested whenever the RDRF or OR
0 = IDLE interrupts disabled
1 = SCI interrupt will be requested whenever the IDLE status flag
0 = Transmitter disabled
1 = SCI transmit logic is enabled and the TXD pin (Port S bit 1/bit
0 = Receiver disabled
1 = Enables the SCI receive circuitry.
0 = Normal SCI Receiver
1 = Enables the wake-up function and inhibits further receiver
0 = Break generator off
1 = Generate a break code (at least 10 or 11 contiguous zeros).
disabled
status flag is set, or when RAF is set while in WAIT mode with
VDDPLL high.
is set.
3) is dedicated to the transmitter. The TE bit can be used to
queue an idle preamble.
interrupts. Normally hardware wakes the receiver by
automatically clearing this bit.
Multiple Serial Interface
Serial Communication Interface (SCI)
Multiple Serial Interface
Technical Data
271

Related parts for MC912D60ACPV8