LF347N STMicroelectronics, LF347N Datasheet - Page 10

• Manufacturer Part Number: LF347N
• Description: IC OPAMP J-FET QUAD 14-DIP
• Manufacturer: STMicroelectronics

Specifications of LF347N

• Amplifier Type: J-FET
• Number Of Circuits: 4
• Slew Rate: 16 V/µs
• Gain Bandwidth Product: 4MHz
• Current - Input Bias: 20pA
• Voltage - Input Offset: 3000µV
• Current - Supply: 1.4mA
• Current - Output / Channel: 40mA
• Voltage - Supply, Single/dual (±): 8 V ~ 36 V, ±4 V ~ 18 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Through Hole
• Package / Case: 14-DIP (0.300", 7.62mm)
• Number Of Channels: 4
• Common Mode Rejection Ratio (min): 70 dB
• Input Offset Voltage: 10 mV
• Input Bias Current (max): 200 pA
• Supply Current: 10.8 mA
• Maximum Power Dissipation: 680 mW
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Maximum Dual Supply Voltage: +/- 18 V
• Mounting Style: Through Hole
• Shutdown: No
• Technology: BiFET
• Voltage Gain Db: 106.02 dB
• Bandwidth: 4 MHz
• Channel Separation: 120
• Common Mode Rejection Ratio: 86
• Current, Input Bias: 20 pA
• Current, Input Offset: 5 pA
• Current, Offset, Input: 5 pA (Typ.) @ 25°C
• Current, Output: 40 mA
• Current, Supply: 1.4 mA
• Gain Bandwidth: 4 MHz (Typ.) @ 25°C, 10 mV
• Harmonic Distortion: 0.01 %
• Input Resistance: 10^12 Ohms (Typ.)
• Number Of Amplifiers: Quad
• Package Type: DIP-14
• Power Dissipation: 680 mW
• Resistance, Input: 10^12 Ohms
• Signal Gain: 200 V/mV
• Temperature, Operating, Maximum: 70 °C
• Temperature, Operating, Minimum: 0 °C
• Temperature, Operating, Range: 0 to +70 °C
• Time, Rise: 0.1 μs
• Voltage, Input: ±15 V
• Voltage, Noise: 15 nV/sqrt Hz
• Voltage, Offset: 3 mV
• Voltage, Offset, Input: 3 mV (Typ.) @ 25°C
• Voltage, Supply: ±18 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Output Type: -
• -3db Bandwidth: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 497-2964-5

10/10
PACKAGE MECHANICAL DATA
14 PINS - PLASTIC MICROPACKAGE (SO)
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences
of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted
by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject
to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not
authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.
Note : (1) D and F do not include mold flash or protrusions - Mold flash or protrusions shall not exceed 0.15mm (.066 inc) ONLY FOR DATA BOOK.
D (1)
Dim.
F (1)
a1
a2
b1
c1
e3
M
A
C
E
G
S
b
e
L
Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco
Min.
0.35
0.19
8.55
0.1
5.8
3.8
4.6
0.5
© 2001 STMicroelectronics - Printed in Italy - All Rights Reserved
© The ST logo is a registered trademark of STMicroelectronics
Singapore - Spain - Sweden - Switzerland - United Kingdom
Millimeters
STMicroelectronics GROUP OF COMPANIES
Typ.
1.27
7.62
0.5
© http://www.st.com
Max.
1.75
0.46
0.25
8.75
1.27
0.68
0.2
1.6
6.2
4.0
5.3
45° (typ.)
8° (max.)
0.004
0.014
0.007
0.336
0.228
0.150
0.181
0.020
Min.
Inches
0.020
0.050
0.300
Typ.
0.069
0.008
0.063
0.018
0.010
0.344
0.244
0.157
0.208
0.050
0.027
Max.