73S1209F-44IM/F Maxim Integrated Products, 73S1209F-44IM/F Datasheet - Page 83

• Manufacturer Part Number: 73S1209F-44IM/F
• Description: IC SMART CARD READER 44-QFN
• Manufacturer: Maxim Integrated Products

Specifications of 73S1209F-44IM/F

• Core Processor: 80515
• Core Size: 8-Bit
• Speed: 24MHz
• Connectivity: I²C, SmartCard, UART/USART
• Peripherals: LED, POR, WDT
• Number Of I /o: 9
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

UG_12xxF_016
ICC_Disable()
Rev. 1.50
Return Codes AR_ICC_OK Successful operation.
Purpose
Synopsis
pucIccIFSD: Input/output parameter
Specifies the IFSD value to be used (or being used). [Default value is 32 as
specified by ISO/IEC 7816-3]
pucIccNAD: Input/output parameter
Specifies the NAD value to be used (or being used). [Default value is 00]
pucIccCLA: Input/output parameter
Specifies the CLA value to be used (or being used) when performing a GetResponse in
case 2 / 4 (in T=0 protocol). Setting pucIccCLA to 0xFF indicates that the GetResponse
command will echo the class byte of the APDU command. [Default value is 00]
punIccTSTimeOut: Input/output parameter
Specifies the maximum delay in clock cycles between the de-assertion of the RST
signal and the leading edge of the TS character of the ATR. [Default value is 40 000]
pucIccRxErrorCounterT0: Input/output parameter
Specifies the maximum number of errors allowed when the Interface Device is in
reception mode (in T=0 protocol).
pucIccTxErrorCounterT0: Input/output parameter
Specifies the maximum number of errors allowed when the Interface Device is in
transmission mode (in T=0 protocol).
pucIccTxErrorCounterT1: Input/output parameter
Specifies the maximum number of errors in the T=1 protocol. The most significant
nibble gives the maximum number of R(NA) block transmissions, while the least
significant nibble gives the maximum number of I or S-block retransmissions.
ucIccConfigurationByte: Input/output parameter
This byte contains the following configuration bits:
[b0] bIccIFSDRequestT1: Input/output. Specifies if the next I-Block will be
[b1] bIccDeactivatedOnTimeOutErrorT1: Input/output. Specifies if the Smart Card
[b2] bIccNADErrorCheckingT1: Input/output. Specifies whether the NAD errors
[b3] bIccABORTManagementT1: Input/output. Specifies whether the ABORT
[b4] bIccRESYNCHManagementT1: Input/output. Specifies whether an
[b5] bIccRetransmitLastBlockAfterRESYNCHT1: Input/output. Specifies whether
[b6] bIccWarningStatusBytesManagementT0: Input/output. Specifies if the IFD
[b7] bIccDeactivateOnIFSDNegotiationError: Input/output. Specifies if the Smart
Deactivate the Smart Card interface, slot number is specified by eIccId.
AR_ICC_RC ICC_Disable ( IN enum ICC_ID eIccId );
preceded by an S(IFS request) (TRUE) or not (FALSE).
interface is to be de-activated (TRUE) on a TimeOut error. Otherwise, an error
recovery procedure is engaged.
are to be checked (TRUE) or not (FALSE).
Request is to be managed (TRUE) or if the contacts are to be de-activated on
S(ABORT Request) reception (FALSE).
S(RESYNCH Request) command is to be sent when too many errors occur
(TRUE) or if a de-activation sequence is to be initiated (FALSE).
the last block in T=1 protocol is to be retransmitted after a resynchronization
occurs or the whole command. [Useful for Microsoft IFDTESTs suite]
must inform the application level of whether the status bytes have been
received just after the command header transmission or after the command
data transmission (in T=0 protocol). [Useful for EMV Test suites]
Card interface is to be de-activated on an IFSD negotiation error.
73S12xxF Software User Guide
83