MFEV800/HAB,122 NXP Semiconductors, MFEV800/HAB,122 Datasheet - Page 3

• Manufacturer Part Number: MFEV800/HAB,122
• Description: KIT EVAL MIFARE RFID
• Manufacturer: NXP Semiconductors
• Series: MIFARE®r
• Type: RFID (Radio Frequency Identification)r

Specifications of MFEV800/HAB,122

• Contents: Pegoda Reader, CD-ROM and 5 MIFARE® Cards
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: MFRD700
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-3161; 935269927122; MFEV800HABM

Philips Semiconductors
1 GENERAL INFORMATION
1.1 Scope
This document describes how to get started with the MF EV800 evaluation kit. This evaluation kit is based on
the Pegoda reader, the MF RD700. The MF RD700 itself is based on the PHILIPS reader IC MF RC500. The
MF RC 500 is member of a new family for highly integrated reader ICs for contactless communication at
13.56 MHz. This family is called MICORE.
The content of the MF EV700 Pegoda CDROM should help the user to design In the MF RD 700 in a specific
application.
The following description covers how to set-up the needed driver to start the Pegoda reader and should give
an overview about the added documents and software libraries.
Please make sure that the USB driver was developed for the Pegoda reader exclusively. Regarding
information concerning to the licence requirements refer to chapter 3.
1.2 General Description
The MF EV 800 full evaluation kit is designed to fulfil several requirements.
The Pegoda reader covers all functionality of the core component, MF RC500 reader IC, to be able to use
this reader for easy PC adaptation and application development. Additionally this package might be taken as
a reference design for the MF RC500 reader IC. The documentation covers all basic requirements to design
in that reader IC into a user specific hardware.
This package includes
Since Philips Semiconductors is mainly focused on the card and reader ICs, Philips does not produce cards.
Nevertheless we have attached some sample cards of manufacturers that already incorporated MIFARE
their standard product range.
Quick Introduction Sheet
Pegoda reader, MF RD700. This reader communicates via USB to a host PC and is ready for plug-In.
as well as the demonstration program MIFAREWnd covering all MIFARE and ISO 14443A commands.
Additionally all needed drivers and Acrobat Readers for Windows set-up is included.
5 MIFARE
Pegoda PCB MF RM700 with USB or RS232 interface
5 MF RC 500 sample ICs
card size antenna
50 Ohm matching circuit
Pegoda CD ROM containing a complete documentation set including software libraries and description
®
Cards
3
Preliminary Specification Rev. 1.0 November 2001
MF EV800
®
in