HTSFCH5601EV/DH,11 NXP Semiconductors, HTSFCH5601EV/DH,11 Datasheet - Page 15

• Manufacturer Part Number: HTSFCH5601EV/DH,11
• Description: IC HITAG-S 256BIT FCP
• Manufacturer: NXP Semiconductors
• Series: HITAG® Sr

Specifications of HTSFCH5601EV/DH,11

• Rf Type: Read / Write
• Frequency: 125kHz
• Features: ISO11785, ISO14223
• Package / Case: Flip-Chip-2
• Product: RFID Transponders
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 568-2212-2; 935272976118; HTSFCH5601EV/DH-T

Philips Semiconductors
7.4
Data are transmitted to the transponder using Amplitude
Shift Keying (ASK) modulation with a modulation index of
100 %. When the field is switched off, the physical state is
named low field, otherwise high field.
7.4.1
Binary Pulse Length Coding (BPLC) is used to encode the
data stream.
All coded data Bits and the end of frame (EOF) condition
start with a low field of length Tg.
Transponder
Antenna
Antenna
HITAG S
Voltage
Voltage
Coded
Data
RWD
Data
on
on
Data Transmission: Read/Write Device →
Transponder (Physical Layer)
C
ODING
T[0]
0
Fig.7 Data Transmission Read/Write Device to Transponder.
0
T[1]
1
15
HTS IC H32/HTS IC H56/HTS IC H48
Afterwards the field is switched on again.
• ‘0’ and ‘1’ can be distinguished by the duration of T[0]
• The end of the data transmission is characterised by an
The following figure shows the data transmission from the
Read/Write Device to the transponder.
and T[1].
end of frame condition.
T
Product Specification Revision 3.1 2006 July 18
g
1
PUBLIC INFORMATION
T
EOF
EOF