KIT33912G5DGEVME Freescale Semiconductor, KIT33912G5DGEVME Datasheet - Page 4

• Manufacturer Part Number: KIT33912G5DGEVME
• Description: Power Management Modules & Development Tools 33912G5 LIN SBC KIT
• Manufacturer: Freescale Semiconductor
• Type: Motor / Motion Controllers & Driversr

Specifications of KIT33912G5DGEVME

• Interface Type: SPI
• Product: Power Management Modules
• Silicon Manufacturer: Freescale
• Silicon Core Number: MC33912
• Kit Application Type: Interface
• Application Sub Type: LIN System
• Kit Contents: Board, CD, Misc Cable
• Rohs Compliant: Yes
• For Use With/related Products: MC33912
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Kit Introduction
3
3.1
3.2
4
Kit Introduction
This Evaluation Board demonstrates the capability of the MC33912G5 as a System Basis Chip (SBC)
with a Local Interconnect Network (LIN) transceiver controlled by a Serial Peripheral Interface (SPI).
It provides two 50mA high-side switches (HSx) and two 150mA low-side switches (LSx) with output
protection, through a Micromatch connector as well as four high-voltage inputs and two current sense
inputs which are accessible through the Micromatch connectors for an easier out-of-the-box evaluation.
The status of the HSx and LSx is provided by LED. The LIN Bus signal is provided through a terminal
block connector.
A single terminal block connector for input power supply allows the user to supply the board with an
external DC power supply.
The KIT33912G5DGEVBE has the ability of configuration of the watchdog period and allows the disabling
of the watchdog. All other features can be programmed via the SPI communication using a standard
100mils 2x8-pin header to communicate with the USB-SPI Dongle. Through the 16-pin header, an
external MCU could be connected to control the SBC device.
EVB Features
•
•
•
•
•
•
•
•
•
•
•
•
AMPD Device Description/Features
•
•
•
•
•
•
•
•
•
Input voltage nominal operating range of 5.5 to 18V
Two high-side switches accessible through Micromatch connector
Two low-side switches accessible through Micromatch connector
The status of HSx and LSx indicated by LED
Two current sense Inputs accessible through Micromatch connector
Four high-voltage analog/logic Inputs accessible through Micromatch connector
Capable to be controlled via SPI
RESET and WAKE-UP push buttons
Configurable watchdog period and allows the watchdog to be disabled
100mils 2x8-pin standard header connector for SPI communication
100mils 16-pin standard header connector for MCU connection
Small Board Size (5.2cm x 7.2cm)
Full-duplex SPI interface at frequencies up to 4.0 MHz
LIN transceiver capable of up to 100 kbps with wave shaping
Two 50 mA high-side and two 150 mA low-side protected switches
Four high-voltage analog/logic Inputs
Configurable window watchdog
5.0V low drop regulator with fault detection and low-voltage reset (LVR) circuitry
Current sense module
Switched/protected 5.0V output (used for Hall sensors)
Pb-free packaging designated by suffix code AC
KIT33912G5DGEVBE Evaluation
Kit, Rev. 1.0
Freescale Semiconductor