MNZB-DKC-900 MeshNetics, MNZB-DKC-900 Datasheet - Page 40

• Manufacturer Part Number: MNZB-DKC-900
• Description: KIT DEV ZIGBIT 900 COMPLETE 1YR
• Manufacturer: MeshNetics
• Type: 802.15.4/Zigbeer

Specifications of MNZB-DKC-900

• Frequency: 868MHz, 915MHz
• For Use With/related Products: MNZB-900-B0
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 758-1009

5. SerialNet
© 2008 MeshNetics
SerialNet is a configuration of BitCloud software which allows control over the most of the
ZigBit/BitCloud functionality through a serial communication interface using standardized
Hayes-like AT command set.
The commands come from Serial/USB interface in simple text form. The command
language principles are described in ITU-T V.250 recommendation (see [11]).
NOTES:
Strictly, the SerialNet is an application developed “on top” of BitCloud API.
Before running SerialNet application make sure that the corresponding image file (see
Appendix A) is uploaded to each board properly by means of Serial Bootloader or JTAG.
See the set of supported AT commands, their syntax and detailed description in the
Reference Manual [3]. Chapter “Examples” of that document shows how to use the
commands to do the following:
Due to flexibility of AT-commands, you can create other network scenarios addressing the
specific needs of your application. The examples are recommended as a starting point in
evaluation of SerialNet.
A variety of terminal programs provide capability to enter AT-command scripts and to
analyze the responses from a board. In order to run the SerialNet application, follow
step-by-step instructions from the Examples section of the document [3].
NOTE:
The +IFC and +IPR commands both change the rate and flow control parameters of
Serial/USB port. If any of these commands is used, the COM port settings on the terminal
program running on the PC should be changed accordingly.
•
•
•
•
•
•
to control LED and DIP switches
to create a network (to set the node roles and addresses)
to transmit data between the nodes
to manage PAN ID and frequency channels
to forward commands for remote execution
to control power consumption for end device.
Z I G B I T ™ 9 0 0 D E V E L O P M E N T K I T 1 . 3
U S E R ’ S G U I D E
Page 40/56