LM22676TJE-ADJ National Semiconductor, LM22676TJE-ADJ Datasheet - Page 5

• Manufacturer Part Number: LM22676TJE-ADJ
• Description: SIMPLESWITH, 3.0A 4.5~42VIN, 7TO263
• Manufacturer: National Semiconductor

Specifications of LM22676TJE-ADJ

• Primary Input Voltage: 42V
• No. Of Outputs: 1
• Output Current: 3A
• Voltage Regulator Case Style: TO-263
• No. Of Pins: 7
• Operating Temperature Range: -40°C To +125°C
• Svhc: No SVHC (15-Dec-2010)
• Package: RoHS Compliant

Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur, including inoperability and degradation of device reliability
and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or other conditions beyond those indicated in
the recommended Operating Ratings is not implied. The recommended Operating Ratings indicate conditions at which the device is functional and should not be
operated beyond such conditions.
Note 2: The absolute maximum specification of the ‘SW to GND’ applies to DC voltage. An extended negative voltage limit of -10V applies to a pulse of up to 50
ns.
Note 3: ESD was applied using the human body model, a 100 pF capacitor discharged through a 1.5 kΩ resistor into each pin.
Note 4: Typical values represent most likely parametric norms at the conditions specified and are not guaranteed.
Note 5: Min and Max limits are 100% production tested at 25°C. Limits over the operating temperature range are guaranteed through correlation using Statistical
Quality Control (SQC) methods. Limits are used to calculate National’s Average Outgoing Quality Level (AOQL).
Note 6: The value of θ
20 to 30°C/W depending on the amount of PCB copper dedicated to heat transfer. See application note AN-1797 for more information.
Note 7: The value of θ
range from 42 to 115°C/W depending on the amount of PCB copper dedicated to heat transfer.
Typical Performance Characteristics
12V, T
J
= 25°C.
Current Limit vs Temperature
JA
JA
Efficiency vs I
for the TO-263 THIN (TJ) package of 22°C/W is valid if package is mounted to 1 square inch of copper. The θ
for the PSOP-8 exposed pad (MR) package of 60°C/W is valid if package is mounted to 1 square inch of copper. The θ
V
OUT
= 3.3V
OUT
and V
IN
30076527
30076503
5
Unless otherwise specified the following conditions apply: Vin =
Normalized Switching Frequency vs Temperature
Normalized R
DS(ON)
vs Temperature
JA
value can range from
30076504
30076508
JA
www.national.com
value can