P87LPC761BN NXP Semiconductors, P87LPC761BN Datasheet - Page 25

• Manufacturer Part Number: P87LPC761BN
• Description: IC, MCU 8BIT 80C51 2K OTP, DIP16
• Manufacturer: NXP Semiconductors

Specifications of P87LPC761BN

• Controller Family/series: (8051) 8052
• Core Size: 8bit
• No. Of I/o's: 14
• Program Memory Size: 2KB
• Ram Memory Size: 128Byte
• Cpu Speed: 20MHz
• Oscillator Type: External, Internal
• No. Of Timers: 2
• Digital: RoHS Compliant
• Package: 16PDIP
• Device Core: 80C51
• Family Name: 87LP
• Maximum Speed: 20 MHz
• Ram Size: 128 Byte
• Operating Supply Voltage: 5 V
• Data Bus Width: 8 Bit
• Program Memory Type: EPROM
• Number Of Programmable I/os: 14
• Interface Type: I2C/UART
• Operating Temperature: 0 to 70 °C
• Number Of Timers: 2

Philips Semiconductors
Oscillator
The P87LPC761 provides several user selectable oscillator options,
allowing optimization for a range of needs from high precision to
lowest possible cost. These are configured when the EPROM is
Low Frequency Oscillator Option
This option supports an external crystal in the range of 20 kHz to
100 kHz.
Table 5. Recommended oscillator capacitors for use with the low frequency oscillator option
Medium Frequency Oscillator Option
This option supports an external crystal in the range of 100 kHz to
4 MHz. Ceramic resonators are also supported in this configuration.
Table 6. Recommended oscillator capacitors for use with the medium frequency oscillator option
High Frequency Oscillator Option
This option supports an external crystal in the range of 4 to 20 MHz.
Ceramic resonators are also supported in this configuration.
Table 7. Recommended oscillator capacitors for use with the high frequency oscillator option
On-Chip RC Oscillator Option
The on-chip RC oscillator option has a typical frequency of 6 MHz
and can be divided down for slower operation through the use of the
DIVM register. For on-chip oscillator tolerance see Electrical
Characteristics table. A clock output on the X2/P2.0 pin may be
enabled when the on-chip RC oscillator is used.
External Clock Input Option
In this configuration, the processor clock is input from an external
source driving the X1/P2.1 pin. The rate may be from 0 Hz up to
20 MHz when VDD is above 4.5 V and up to 10 MHz when VDD is
below 4.5 V. When the external clock input mode is used, the
X2/P2.0 pin may be used as a standard port pin. A clock output on
2002 Mar 07
Low power, low price, low pin count (16 pin)
microcontroller with 2 kbyte OTP
Frequency
Frequency
Oscillator
Oscillator
100 kHz
16 MHz
20 MHz
20 kHz
32 kHz
Oscillator Freq ency
Oscillator Frequency
4 MHz
8 MHz
100 kHz
1 MHz
4 MHz
Lower Limit
Lower Limit
15 pF
15 pF
15 pF
15 pF
15 pF
–
–
V
V
DD
DD
Optimal Value
Optimal Value
= 2.7 to 4.5 V
= 2.7 to 4.5 V
Lower Limit
15 pF
15 pF
15 pF
33 pF
15 pF
–
–
33 pF
15 pF
15 pF
Upper Limit
Upper Limit
33 pF
33 pF
33 pF
47 pF
33 pF
22
–
–
programmed. Basic oscillator types that are supported include: low,
medium, and high speed crystals, covering a range from 20 kHz to
20 MHz; ceramic resonators; and on-chip RC oscillator.
Table 5 shows capacitor values that may be used with a quartz
crystal in this mode.
Table 6 shows capacitor values that may be used with a quartz
crystal in this mode.
Table 7 shows capacitor values that may be used with a quartz
crystal in this mode.
the X2/P2.0 pin may be enabled when the external clock input is
used.
Clock Output
The P87LPC761 supports a clock output function when either the
on-chip RC oscillator or external clock input options are selected.
This allows external devices to synchronize to the P87LPC761.
When enabled, via the ENCLK bit in the P2M1 register, the clock
output appears on the X2/CLKOUT pin whenever the on-chip
oscillator is running, including in Idle mode. The frequency of the
clock output is 1/6 of the CPU clock rate. If the clock output is not
needed in Idle mode, it may be turned off prior to entering Idle,
saving additional power. The clock output may also be enabled
when the external clock input option is selected.
V
DD
Optimal Value
= 2.7 to 4.5 V
Lower Limit
Lower Limit
33 pF
15 pF
15 pF
33 pF
33 pF
15 pF
15 pF
15 pF
15 pF
15 pF
V
V
DD
DD
Optimal Value
Optimal Value
= 4.5 to 6.0 V
= 4.5 to 6.0 V
33 pF
33 pF
15 pF
33 pF
33 pF
15 pF
15 pF
Upper Limit
P87LPC761
47 pF
33 pF
33 pF
Upper Limit
Upper Limit
Preliminary data
47 pF
47 pF
33 pF
68 pF
47 pF
33 pF
33 pF