DSPIC30F2023-20E/PT Microchip Technology, DSPIC30F2023-20E/PT Datasheet - Page 187

• Manufacturer Part Number: DSPIC30F2023-20E/PT
• Description: 12KB, Flash, 512bytes-RAM, 30MIPS, 35I/O, 16-bit Family,nanoWatt 44 TQFP 10x10x1
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F2023-20E/PT

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 20 MIPS
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 35
• Program Memory Size: 12KB (4K x 24)
• Program Memory Type: FLASH
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 44-TQFP, 44-VQFP
• Package: 44TQFP
• Device Core: dsPIC
• Family Name: dsPIC30
• Maximum Speed: 20 MHz
• Operating Supply Voltage: 3.3|5 V
• Data Bus Width: 16 Bit
• Number Of Programmable I/os: 35
• Interface Type: I2C/SPI/UART
• On-chip Adc: 12-chx10-bit
• Number Of Timers: 3
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DV164005 - KIT ICD2 SIMPLE SUIT W/USB CABLE
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

EXAMPLE 16-1:
16.15 Changing A/D Clock
In general, the ADC cannot accept changes to the ADC
clock divisor while ADON = 1. If the user makes A/D
clock changes while ADON = 1, the results will be
indeterminate.
16.16 Sample and Conversion
The ADC module always assigns two ADC clock peri-
ods for the sampling process. When operating at the
maximum conversion rate of 2 Msps per channel, the
sampling period is:
© 2006 Microchip Technology Inc.
; The actual pair conversion interrupt handler
; Don't forget to pop the stack when done and return from interrupt
ADC_PAIR0_PROC:
ADC_PAIR1_PROC:
ADC_PAIR2_PROC:
ADC_PAIR3_PROC:
ADC_PAIR4_PROC:
ADC_PAIR5_PROC:
2 x 41.6 nsec = 83.3 nsec.
...
POP.S
RETFIE
...
POP.S
RETFIE
...
POP.S
RETFIE
...
POP.S
RETFIE
...
POP.S
RETFIE
...
POP.S
RETFIE
ADC BASE REGISTER CODE (CONTINUED)
; The ADC pair 0 conversion complete handler
; Restore W0-W3 and SR registers
; Return from Interrupt
; The ADC pair 1 conversion complete handler
; Restore W0-W3 and SR registers
; Return from Interrupt
; The ADC pair 2 conversion complete handler
; Restore W0-W3 and SR registers
; Return from Interrupt
; The ADC pair 3 conversion complete handler
; Restore W0-W3 and SR registers
; Return from Interrupt
; The ADC pair 4 conversion complete handler
; Restore W0-W3 and SR registers
; Return from Interrupt
; The ADC pair 5 conversion complete handler
; Restore W0-W3 and SR registers
; Return from Interrupt
Preliminary
Each ADC pair specified in the ADCPCx registers ini-
tiates a sample operation when the selected trigger
event occurs. The conversion of the sampled analog
data occurs as resources become available.
If a new trigger event occurs for a specific channel
before a previous sample and convert request for that
channel has been processed, the newer request is
ignored. It is the user’s responsibility not to exceed the
conversion rate capability for the module.
The actual conversion process requires 10 additional
ADC clocks. The conversion is processed serially, bit 9
first, then bit 8, down to bit 0. The result is stored when
the conversion is completed.
dsPIC30F1010/202X
DS70178C-page 185