CB-OBS433X-02-0 ConnectBlue, CB-OBS433X-02-0 Datasheet - Page 25

• Manufacturer Part Number: CB-OBS433X-02-0
• Description: SERIAL PORT ADAPTER U.FL
• Manufacturer: ConnectBlue

Specifications of CB-OBS433X-02-0

• Frequency: 2.402GHz ~ 2.48GHz
• Modulation Or Protocol: Bluetoothv2.1+EDR
• Applications: General Purpose
• Power - Output: 17dBm
• Sensitivity: -94dBm
• Voltage - Supply: 3.3 V ~ 6 V
• Current - Receiving: 200mA
• Current - Transmitting: 200mA
• Data Interface: Connector, 2 x 10 Header, 2 mm Pitch
• Antenna Connector: U.FL
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 809-1039

connectBlue
Copyright © 2010 connectBlue AB
In the tables below you can find information about Bluetooth properties. The output power of the cB-OBS433 device is max 17 dBm
EIRP.
Table 10: Bluetooth information cB-OBS433
All products based on the PCB cB-0939 have been qualified according to the Bluetooth specification 2.1+EDR.
Table 11: Bluetooth Qualification information
The following Bluetooth profiles are supported (covered functionality):
When creating end products based on the cB-OBS433 the following applies:
For more information please contact
7 Bluetooth Information
7.1 General information
7.2 Bluetooth Qualification information
Parameter
Bluetooth radio
Host micro controller
RF output power
Receive sensitive level
Receive input level (max) +5 dBm
Output frequency
Bluetooth stack
Bluetooth qualification
Module
cB-OBS433 2.1 + EDR
Generic Access Profile (GAP)
Serial Port Profile (SPP)
Dial-up Networking Profile (DUN GW, DUN DT)
The end product does not have to be re-tested or re-qualified.
A free of charge Bluetooth End Product Listing (EPL)
applies for all products implementing Bluetooth technology. The EPL requires no testing (online listing only) and is good
marketing since the product is published at the Bluetooth web site www.bluetooth.com. A free of charge "Adopter Bluetooth SIG
membership" is required.
Create the EPL based on the connectBlue cB-OBH433 (QD ID: TBD) combined with the connectBlue Embedded Bluetooth Host
Stack (QD ID:TBD). A guide describing each step in the end product listing process is available in the connectBlue Bluetooth
Qualification Guide
The Bluetooth Trademark may be placed on the end product. This requires a free of charge Adopter Bluetooth SIG membership.
For more information see
The Bluetooth Trademark may be used in material related to the end product. This requires a free of charge Adopter Bluetooth
SIG membership. For more information see
Bluetooth specification Referenced QDIDs
Data
ST-Ericsson STLC2500DB
ST Microelectronics STM32F10x
Class 1, max 17 dBm EIRP
-94 dBm EIRP
2.402 - 2.480 GHz, ISM band.
connectBlue Embedded Bluetooth Stack
2.1 + EDR
.
www.bluetooth.org
connectBlue
B016927combined with B015102
.
www.bluetooth.org
must
be completed at the Bluetooth SIG website www.bluetooth.org. This
.
Page 25 of 42