CB-OBS433X-02-0 ConnectBlue, CB-OBS433X-02-0 Datasheet - Page 35

• Manufacturer Part Number: CB-OBS433X-02-0
• Description: SERIAL PORT ADAPTER U.FL
• Manufacturer: ConnectBlue

Specifications of CB-OBS433X-02-0

• Frequency: 2.402GHz ~ 2.48GHz
• Modulation Or Protocol: Bluetoothv2.1+EDR
• Applications: General Purpose
• Power - Output: 17dBm
• Sensitivity: -94dBm
• Voltage - Supply: 3.3 V ~ 6 V
• Current - Receiving: 200mA
• Current - Transmitting: 200mA
• Data Interface: Connector, 2 x 10 Header, 2 mm Pitch
• Antenna Connector: U.FL
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 809-1039

connectBlue
Copyright © 2010 connectBlue AB
Figure 17: A complete RS422/RS485 transceiver design.
The BLUE logic LED signal is not multiplexed with any other functionality, which makes the design more straightforward (see Figure 18).
There are two important notes:
Figure 18: A blue LED can be connected directly to the module if the LED current is below 4mA. A high state (active low) makes
the voltage drop over the LED to 2.2V. This is not enough to light the LED.
10.2.3 LED and Switch Design
10.2.3.1 BLUE Signal
A blue LED requires about 3.5V forward voltage drop (cannot be used in a 3.3V system).
The BLUE signal can be used to detect if the module is connected or not. The BLUE signal flashes when the module is sending
and receiving data (see section
Operating status
). See Figure 19 for an example on how to suppress the flashes.
Page 35 of 42