CB-OBS433X-02-0 ConnectBlue, CB-OBS433X-02-0 Datasheet - Page 6

• Manufacturer Part Number: CB-OBS433X-02-0
• Description: SERIAL PORT ADAPTER U.FL
• Manufacturer: ConnectBlue

Specifications of CB-OBS433X-02-0

• Frequency: 2.402GHz ~ 2.48GHz
• Modulation Or Protocol: Bluetoothv2.1+EDR
• Applications: General Purpose
• Power - Output: 17dBm
• Sensitivity: -94dBm
• Voltage - Supply: 3.3 V ~ 6 V
• Current - Receiving: 200mA
• Current - Transmitting: 200mA
• Data Interface: Connector, 2 x 10 Header, 2 mm Pitch
• Antenna Connector: U.FL
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 809-1039

connectBlue
Copyright © 2010 connectBlue AB
This section describes the signals available on the module interface connectors. There are 4 ways to connect to the OEM Serial Port
Adapter:
Figure 3: The solder pads J6 are available on the long edges of the bottom side of the module (cB-OBS433i-04). The
board-to-board connector pads J2-J3 are located between the mounting holes.
Figure 4: The 2x20 2mm pin header connector (J1) mounted on the module (cB-OBS433i-02).
3 Electrical Interface and Connectors
Via the PCB solder pads on the edge of the PCB, J6 (see Figure 3). See Section "
information.
Via the 2x20-pin 1mm pitch board-to-board (one piece part) connectors, J2 through J3. The J2 to J3 connectors on the OEM
Serial Port Adapter exist on the module only as a mating PCB-layout pattern (see Figure 3). See Section
Board-to-Board Connectors
Optional: Via the 2x10-pin 2 mm pitch pin header connector, J1 (see Figure 4).
Optional: Via the JST connector, J8 (see Figure 5). The connector is a 6 poles wire connector. The pitch is 1mm. The
manufacturer of the connector is JST with part number SM06B-SRSS-TB. The SM06B-SRSS-TB connector is e.g. mated with
the SHR-06V-S from JST but other options are available.
" for more information.
Using the J6 PCB solder pads
"Using the J2/J3
" for more
Page 6 of 42