142-5701-206 Emerson Network Power, 142-5701-206 Datasheet - Page 215

• Manufacturer Part Number: 142-5701-206
• Manufacturer: Emerson Network Power
• Type: SMAr

Specifications of 142-5701-206

• Gender: F
• Body Style: Straight
• Terminate To: PCB
• Mounting Style: Through Hole
• Termination: Solder
• Operating Temp Range: -65C to 165C
• Body Plating: Nickel
• Contact Plating: Gold
• Contact Material: Beryllium Copper
• Insulation Material: Polytetrafluoroethyl
• Body Material: Brass
• Product Height (mm): 9.52mm
• Impedance: 50Ohm
• Lead Free Status / RoHS Status: Supplier Unconfirmed

MCX Solder Type Right Angle
Plug for Semi-Rigid Cable
Connectivity Solutions
Tel: [phone]
•
Fax: [phone]
Assembly Instructions
•
www.EmersonNetworkPower.com/connectivity
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
1. Identify connector parts. (3 piece parts)
2. Strip cable to dimensions shown. Do not nick
3. Insert cable into body making sure cable
4. Solder body to cable. Use a minimum amount
center conductor.
insulation bottoms on center contact. Solder
center conductor to contact through the rear
access port. Use a minimum amount of
solder for a good joint. .020 (0.51) diameter
solder is recommended.
of heat to minimize cable insulation movement.
Assemble insulator then place expansion cap
in access port and seat with a .156 (3.96)
diameter punch or hand tool 141-0000-908.
(.086 Semi-Rigid)
CABLE GROUP
RG-405/U
133-3693-101
133-3693-106
PART NO.
215