142-5701-206 Emerson Network Power, 142-5701-206 Datasheet - Page 217

• Manufacturer Part Number: 142-5701-206
• Manufacturer: Emerson Network Power
• Type: SMAr

Specifications of 142-5701-206

• Gender: F
• Body Style: Straight
• Terminate To: PCB
• Mounting Style: Through Hole
• Termination: Solder
• Operating Temp Range: -65C to 165C
• Body Plating: Nickel
• Contact Plating: Gold
• Contact Material: Beryllium Copper
• Insulation Material: Polytetrafluoroethyl
• Body Material: Brass
• Product Height (mm): 9.52mm
• Impedance: 50Ohm
• Lead Free Status / RoHS Status: Supplier Unconfirmed

MCX Crimp Type Straight Connectors
for Flexible Cable - 75 Ohm
Connectivity Solutions
Tel: [phone]
•
Fax: [phone]
1. Identify connector parts. (2 piece parts–except bulkhead)
2. Strip cable to dimensions shown. Do not nick braid or center
3. Flare braid and slide cable into body making certain that the
4. Arrange braid uniformly around crimp stem. Slide crimp sleeve
Assembly Instructions
conductor. A wire stripper of correct size is recommended for
this step. Twist stranded center conductor into tight bundle and
tin (optional). Slide crimp sleeve onto cable as shown.
cable dielectric bottoms against center contact.
Solder: Solder center conductor to contact through the side
access ports and hole in center contact. Use a minimum amount
of solder for a full fillet joint. .015 (0.38) diameter solder is
recommended.
Crimp: Crimp Contact Attachment: Crimp contact using
141-0000-924 dieset in 144-0000-900 tool frame.
over braid and access ports. Crimp securely using recom-
mended hex size and crimp tool.
•
www.EmersonNetworkPower.com/connectivity
CABLE GROUP
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
BELDEN 735A
RG-179 DS
RG-179 DS
RG-179 DS
RG-179
RG-179
RG-179
133-8433-001
133-8434-001
133-8333-001
133-8334-001
133-8333-401
133-8334-401
133-8445-001
PART NO.
CRIMP HEX
.128 (3.25)
.151 (3.83)
.128 (3.25)
.151 (3.83)
.128 (3.25)
.151 (3.83)
.151 (3.83)
217