142-5701-206 Emerson Network Power, 142-5701-206 Datasheet - Page 238

• Manufacturer Part Number: 142-5701-206
• Manufacturer: Emerson Network Power
• Type: SMAr

Specifications of 142-5701-206

• Gender: F
• Body Style: Straight
• Terminate To: PCB
• Mounting Style: Through Hole
• Termination: Solder
• Operating Temp Range: -65C to 165C
• Body Plating: Nickel
• Contact Plating: Gold
• Contact Material: Beryllium Copper
• Insulation Material: Polytetrafluoroethyl
• Body Material: Brass
• Product Height (mm): 9.52mm
• Impedance: 50Ohm
• Lead Free Status / RoHS Status: Supplier Unconfirmed

238
Assembly Instructions
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
SMB/SMC Solder Type Right Angle
Plugs for Semi-Rigid Cable
Connectivity Solutions
Tel: [phone]
•
Fax: [phone]
1. Identify connector parts. (2 piece parts - except diecast)
2. Strip cable to dimensions shown. Do not nick center
3. Insert cable into body making certain that the cable
4. Solder body to cable. Use a minimum amount of heat
•
www.EmersonNetworkPower.com/connectivity
conductor.
insulation bottoms on center contact. Solder center
conductor to contact through the rear and side access
ports. Use a minimum amount of solder for a good
joint. .020 (0.51) diameter solder is recommended.
to minimize cable insulation movement. Place expan-
sion cap in access port and set with .125 (3.17) diam-
eter punch. Snap cover ring over side access port.
(.086 Semi-Rigid)
CABLE GROUP
RG-405/U
131-1693-101
131-1693-116
131-3693-101
131-3693-116
PART NO.