142-5701-206 Emerson Network Power, 142-5701-206 Datasheet - Page 227

• Manufacturer Part Number: 142-5701-206
• Manufacturer: Emerson Network Power
• Type: SMAr

Specifications of 142-5701-206

• Gender: F
• Body Style: Straight
• Terminate To: PCB
• Mounting Style: Through Hole
• Termination: Solder
• Operating Temp Range: -65C to 165C
• Body Plating: Nickel
• Contact Plating: Gold
• Contact Material: Beryllium Copper
• Insulation Material: Polytetrafluoroethyl
• Body Material: Brass
• Product Height (mm): 9.52mm
• Impedance: 50Ohm
• Lead Free Status / RoHS Status: Supplier Unconfirmed

SMA Solder Type Antenna Connector
Plug for Flexible or Semi-Rigid Cable
FLEXIBLE CABLE
RG-178, RG-196
SEMI-RIGID
CABLE DIA.
.047 (1.19)
Connectivity Solutions
Tel: [phone]
•
Fax: [phone]
Assembly Instructions
•
www.EmersonNetworkPower.com/connectivity
1. Identify connector parts. (2 piece parts)
2. Strip cable to dimensions shown. Do not nick
3. Flexible Cable Attachment: Twist stranded
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
center conductor or braid on flexible cable.
center conductor into tight bundle and tin
(optional). Slide cable into body, making sure
cable insulation bottoms on center contact and
braid fits inside stem. Solder center conductor
to contact through the side access ports. Use a
minimum amount of solder for a good joint. .020
(0.51) diameter solder is recommended.
Solder braid to body. Use a minimum amount of
solder to completely join the braid to the body.
Semi-Rigid Cable Attachments: Slide cable
into body making certain cable insulation bottoms
on center contact. Solder center conductor to
contact through the side access ports. Use a
minimum amount of solder for a good joint. .020
(0.51) diameter solder is recommended. Sol-
der body to cable jacket. Use a minimum amount
of heat to minimize cable insulation movement.
RG-178/U, .047 Semi-Rigid
CABLE GROUP
142-0801-421
PART NO.
227