KSZ8842-32MQL Micrel Inc, KSZ8842-32MQL Datasheet - Page 121

• Manufacturer Part Number: KSZ8842-32MQL
• Description: 2-Port Ethernet Switch/Repeater + Generic (32-bit) Bus Interface( )
• Manufacturer: Micrel Inc

Specifications of KSZ8842-32MQL

• Controller Type: Ethernet Switch Controller
• Interface: PCI
• Voltage - Supply: 3.1 V ~ 3.5 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 128-MQFP, 128-PQFP
• Number Of Primary Switch Ports: 2
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: Yes
• Integrated Led Drivers: Yes
• Phy/transceiver Interface: MII
• Power Supply Type: Analog/Digital
• Package Type: PQFP
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 70C
• Operating Temperature (min): 0C
• Pin Count: 128
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 3.5V
• Operating Supply Voltage (min): 3.1V
• Operating Temperature Classification: Commercial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 576-1634 - BOARD EVALUATION KSZ8842-16MQL
• Current - Supply: -
• Lead Free Status / RoHS Status: Compliant, Lead free / RoHS Compliant
• Other names: 576-1479; 576-1479-5; 576-1479-5

VLAN Table
The KSZ8842M uses the VLAN table to perform look-ups. If 802.1Q VLAN mode is enabled (SGCR2[15]), this table will
be used to retrieve the VLAN information that is associated with the ingress packet. This information includes FID (filter
ID), VID (VLAN ID), and VLAN membership as described in Table 20:
If 802.1Q VLAN mode is enabled, then KSZ8842M will assign a VID to every ingress packet. If the packet is untagged or
tagged with a null VID, then the packet is assigned with the default port VID of the ingress port. If the packet is tagged
with non null VID, then VID in the tag will be used. The look up process will start from the VLAN table look up. If the VID
is not valid, then packet will be dropped and no address learning will take place. If the VID is valid, then FID is retrieved.
The FID+DA and FID+SA lookups are performed. The FID+DA look up determines the forwarding ports. If FID+DA fails,
then the packet will be broadcast to all the members (excluding the ingress port) of the VLAN. If FID+SA fails, then the
FID+SA will be learned.
VLAN Table Lookup Examples:
Micrel, Inc.
Bit
19
18-16
15-12
11-0
October 2007
1. VLAN Table Read (read the third entry, at the indirect address offset 0x02)
Then
2. VLAN Table Write (write the seventh entry, at the indirect address offset 0x06)
Default Value
1
111
0x0
0x001
Write to reg. IACR with 0x1402 (set indirect address and trigger a read VLAN table operation)
Read reg. IADR5 (VLAN table bits 19-16)
Read reg. IADR4 (VLAN table bits 15-0)
Write to reg. IADR5 (VLAN table bits 19-16)
Write to reg. IADR4 (VLAN table bits 15-0)
Write to reg. IACR with 0x1406 (set indirect address and trigger a read VLAN table operation)
R/W
RW
R/W
R/W
R/W
Description
Valid
1: specifies that this entry is valid, the look up result will be used
0: specifies that this entry is not valid
Membership
Specifies which ports are members of the VLAN. If a DA look up fails (no match in
both static and dynamic tables), the packet associated with this VLAN will be
forwarded to ports specified in this field. For example: 101 means port 3 and 1 are in
this VLAN.
FID
Specifies the Filter ID. The KSZ8842M supports 16 active VLANs represented by
these four bit fields. The FID is the mapped ID. If 802.1Q VLAN is enabled, the look
up will be based on FID+DA and FID+SA.
VID
Specifies the IEEE 802.1Q 12 bits VLAN ID.
Table 20. VLAN Table Format (16 Entries)
121
KSZ8842-16/32 MQL/MVL/MVLI/MBL
M9999-102207-1.9