TDA8932BTW NXP Semiconductors, TDA8932BTW Datasheet - Page 5

• Manufacturer Part Number: TDA8932BTW
• Description: Audio Amplifiers 2X15W BTL CLASS D AMP+VOLCTRL
• Manufacturer: NXP Semiconductors

Specifications of TDA8932BTW

• Product: Class-D
• Output Power: 55 W
• Available Set Gain: 36 dB
• Common Mode Rejection Ratio (min): 75 dB
• Thd Plus Noise: 0.007 %
• Operating Supply Voltage: 22 V
• Supply Current: 0.6 mA
• Maximum Power Dissipation: 5000 mW
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Audio Load Resistance: 8 Ohms
• Dual Supply Voltage: +/- 11 V
• Input Signal Type: Differential
• Minimum Operating Temperature: - 40 C
• Output Signal Type: Differential, Single
• Supply Type: Single or Dual
• Supply Voltage (max): 36 V
• Supply Voltage (min): 10 V
• Output Type: 1-Channel Mono or 2-Channel Stereo
• Package / Case: HTSSOP-32
• Operational Class: Class-D
• Audio Amplifier Output Configuration: 1-Channel Mono/2-Channel Stereo
• Audio Amplifier Function: Speaker
• Total Harmonic Distortion: 0.007@8Ohm@1W%
• Single Supply Voltage (typ): 22V
• Dual Supply Voltage (typ): ±11V
• Supply Current (max): 0.195@22VmA
• Power Supply Requirement: Single/Dual
• Power Dissipation: 5W
• Rail/rail I/o Type: No
• Single Supply Voltage (min): 10V
• Single Supply Voltage (max): 36V
• Dual Supply Voltage (min): ±5V
• Dual Supply Voltage (max): ±18V
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 32
• Package Type: HTSSOP EP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: TDA8932BTW/N2

NXP Semiconductors
8. Functional description
TDA8932B_4
Product data sheet
8.1 General
Table 3.
[1]
The TDA8932B is a mono full-bridge or stereo half-bridge audio power amplifier using
class-D technology. The audio input signal is converted into a Pulse Width Modulated
(PWM) signal via an analog input stage and PWM modulator. To enable the output power
Diffusion Metal Oxide Semiconductor (DMOS) transistors to be driven, this digital PWM
signal is applied to a control and handshake block and driver circuits for both the high side
and low side. A 2nd-order low-pass filter converts the PWM signal to an analog audio
signal across the loudspeakers.
The TDA8932B contains two independent half-bridges with full differential input stages.
The loudspeakers can be connected in the following configurations:
The TDA8932B contains common circuits to both channels such as the oscillator, all
reference sources, the mode functionality and a digital timing manager. The following
protections are built-in: thermal foldback, temperature, current and voltage protections.
Symbol
HVP2
V
BOOT2
OUT2
V
STAB2
STAB1
V
OUT1
BOOT1
V
HVP1
OSCIO
V
Exposed die
pad
•
•
DDP2
SSP2
SSP1
DDP1
SSD(HW)
The exposed die pad has to be connected to V
Mono full-bridge: Bridge Tied Load (BTL)
Stereo half-bridge: Single-Ended (SE)
Pin description
Pin
19
20
21
22
23
24
25
26
27
28
29
30
31
32
-
Rev. 04 — 18 December 2008
Description
half supply output voltage 2 for charging single-ended capacitor for
channel 2
positive power supply voltage for channel 2
bootstrap high-side driver channel 2
PWM output channel 2
negative power supply voltage for channel 2
decoupling of internal 11 V regulator for channel 2 drivers
decoupling of internal 11 V regulator for channel 1 drivers
negative power supply voltage for channel 1
PWM output channel 1
bootstrap high-side driver channel 1
positive power supply voltage for channel 1
half supply output voltage 1 for charging single-ended capacitor for
channel 1
oscillator input in slave configuration or oscillator output in master
configuration
negative digital supply voltage and handle wafer connection
HTSSOP32 package only
…continued
SSD(HW)
[1]
.
Class-D audio amplifier
TDA8932B
© NXP B.V. 2008. All rights reserved.
5 of 48