P5DF081HN/T1AD2060 NXP Semiconductors, P5DF081HN/T1AD2060 Datasheet - Page 24

• Manufacturer Part Number: P5DF081HN/T1AD2060
• Description: P5DF081HN/HVQFN32/REEL13//T1AD
• Manufacturer: NXP Semiconductors
• Series: MIFARE®r

Specifications of P5DF081HN/T1AD2060

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

NXP Semiconductors
Table 16.
P5DF081_SDS
Objective short data sheet
PUBLIC
Command
MFP_WritePerso
MFP_Authenticate
MFP_CombinedRead
MFP_CombinedWrite
MFP_ChangeKey
MIFARE Plus in X-mode commands
8.6.11 MIFARE Plus in X-mode commands
This chapter describes the commands for the MIFARE Plus PICC’s when the MIFARE
SAM AV2 is used in MIFARE SAM AV2 mode.
When a MIFARE Plus communication is established between the SAM and a MIFARE
Plus PICC, the corresponding SAM logical channel maintains the state (e.g. the read and
write counters) required to manage the secure messaging with the MIFARE Plus PICC.
Description
MFP_WritePerso is a multi-block write command. It performs up to 13 MFP
WritePerso commands. If more than 13 values are to be updated, several
MFP_WritePerso are to be issued. There is no command chaining for this command.
MFP_Authenticate performs all MIFARE Plus authentications (e.g. SL1, SL2, SL3,
originality keys...). The choice of whether a first or following authentication is to be
performed is indicated in the parameters of the command. Also the user has to
indicate which session key derivation needs to be used afterwards: no session keys
needed (SL1 card authentication, originality keys authentication), key derivation to
continue with MF_Authenticate (SL2) or session key derivation to continue with
normal MIFARE Plus transaction (SL3).
MFP_CombinedRead performs one MIFARE Plus read command.
MFP_CombinedWrite performs a MIFARE Plus write command where a write command can
be a MIFARE Plus Write, Increment, Decrement, Transfer, Restore, Increment Transfer or
Decrement Transfer command.
Each MFP_CombinedWrite command is restricted to one MIFARE Plus write command.
MFP_ChangeKey replaces one of the MIFARE Plus PICC keys by one of the keys
stored in the SAM.
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 12 August 2010
191710
P5DF081
MIFARE SAM AV2
© NXP B.V. 2010. All rights reserved.
24 of 36