PIC16F1937-E/MV Microchip Technology, PIC16F1937-E/MV Datasheet - Page 152

• Manufacturer Part Number: PIC16F1937-E/MV
• Description: 14KB Flash, 512B RAM, 256B EEPROM, LCD, 1.8-5.5V 40 UQFN 5x5x0.5mm TUBE
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16F1937-E/MV

• Processor Series: PIC16F
• Core: PIC
• Program Memory Type: Flash
• Program Memory Size: 14 KB
• Data Ram Size: 256 B
• Interface Type: MI2C, SPI, EUSART
• Number Of Timers: 5
• Operating Supply Voltage: 1.8 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Package / Case: UQFN-40
• Development Tools By Supplier: MPLAB IDE Software
• Minimum Operating Temperature: - 40 C
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 32MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LCD, POR, PWM, WDT
• Number Of I /o: 36
• Eeprom Size: 256 x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 14x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Lead Free Status / Rohs Status: Details

PIC16(L)F1934/6/7
13.6
REGISTER 13-1:
REGISTER 13-2:
REGISTER 13-3:
DS41364E-page 152
bit 7
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
bit 7-0
bit 7
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
bit 7-0
bit 7
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
bit 7-0
R/W/HS-0/0
R/W-0/0
IOCBP7
R/W-0/0
IOCBN7
IOCBF7
Interrupt-On-Change Registers
IOCBP<7:0>: Interrupt-on-Change Positive Edge Enable bits
1 = Interrupt-on-Change enabled on the pin for a positive going edge. Associated Status bit and
0 = Interrupt-on-Change disabled for the associated pin.
IOCBN<7:0>: Interrupt-on-Change Negative Edge Enable bits
1 = Interrupt-on-Change enabled on the pin for a negative going edge. Associated Status bit and
0 = Interrupt-on-Change disabled for the associated pin.
IOCBF<7:0>: Interrupt-on-Change Flag bits
1 = An enabled change was detected on the associated pin.
0 = No change was detected, or the user cleared the detected change.
R/W/HS-0/0
R/W-0/0
IOCBP6
R/W-0/0
IOCBN6
IOCBF6
Set when IOCBPx = 1 and a rising edge was detected on RBx, or when IOCBNx = 1 and a falling
edge was detected on RBx.
interrupt flag will be set upon detecting an edge.
interrupt flag will be set upon detecting an edge.
IOCBP: INTERRUPT-ON-CHANGE POSITIVE EDGE REGISTER
IOCBN: INTERRUPT-ON-CHANGE NEGATIVE EDGE REGISTER
IOCBF: INTERRUPT-ON-CHANGE FLAG REGISTER
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
R/W/HS-0/0 R/W/HS-0/0 R/W/HS-0/0
R/W-0/0
IOCBP5
R/W-0/0
IOCBN5
IOCBF5
R/W-0/0
IOCBP4
R/W-0/0
IOCBN4
IOCBF4
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
HS - Bit is set in hardware
IOCBP3
IOCBN3
R/W-0/0
R/W-0/0
IOCBF3
R/W/HS-0/0
IOCBN2
R/W-0/0
IOCBP2
R/W-0/0
IOCBF2
 2008-2011 Microchip Technology Inc.
R/W/HS-0/0
IOCBN1
R/W-0/0
IOCBP1
R/W-0/0
IOCBF1
R/W/HS-0/0
R/W-0/0
IOCBP0
R/W-0/0
IOCBN0
IOCBF0
bit 0
bit 0
bit 0