PIC18F46J13T-I/PT Microchip Technology, PIC18F46J13T-I/PT Datasheet - Page 397

• Manufacturer Part Number: PIC18F46J13T-I/PT
• Description: 44-pin, GP, 64KB Flash, 4KB RAM, 12 MIPS, 12-bit ADC, NanoWatt XLP 44 TQFP 10x10
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F46J13T-I/PT

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 34
• Program Memory Size: 64KB (32K x 16)
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 13x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MA180030 - BOARD DEMO PIC18F47J13 FS USBMA180029 - BOARD DEMO PIC18F47J53 FS USB
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

26.0
The Charge Time Measurement Unit (CTMU) is a
flexible analog module that provides accurate differen-
tial time measurement between pulse sources, as well
as asynchronous pulse generation. By working with
other on-chip analog modules, the CTMU can be used
to precisely measure time, measure capacitance,
measure relative changes in capacitance or generate
output pulses with a specific time delay. The CTMU is
ideal for interfacing with capacitive-based sensors.
The module includes the following key features:
• Up to 13 channels available for capacitive or time
• On-chip precision current source
• Four-edge input trigger sources
• Polarity control for each edge source
FIGURE 26-1:
 2010 Microchip Technology Inc.
measurement input
CHARGE TIME
MEASUREMENT UNIT (CTMU)
ECCP1
CTED1
CTED2
Timer1
EDGEN
EDGSEQEN
EDG1SEL<1:0>
EDG1POL
EDG2SEL<1:0>
EDG2POL
CTMU BLOCK DIAGRAM
Control
Edge
Logic
EDG1STAT
EDG2STAT
A/D Converter
CTMUCONH:CTMUCONL
Preliminary
Current Source
CTMUICON
Current
Control
PIC18F47J13 FAMILY
Comparator 2
Input
ITRIM<5:0>
IRNG<1:0>
• Control of edge sequence
• Control of response to edges
• Time measurement resolution of 1 nanosecond
• High-precision time measurement
• Time delay of external or internal signal
• Accurate current source suitable for capacitive
The CTMU works in conjunction with the A/D Converter
to provide up to 13 channels for time or charge
measurement, depending on the specific device and
the number of A/D channels available. When config-
ured for time delay, the CTMU is connected to one of
the analog comparators. The level-sensitive input edge
sources can be selected from four sources: two
external inputs, Timer1 or Output Compare Module 1.
Figure 26-1 provides a block diagram of the CTMU.
asynchronous to system clock
measurement
Comparator 2 Output
Generator
Control
CTMU
Logic
Pulse
TGEN
IDISSEN
DS39974A-page 397
CTPLS