SP000081008 Infineon Technologies, SP000081008 Datasheet - Page 2

• Manufacturer Part Number: SP000081008
• Manufacturer: Infineon Technologies

Specifications of SP000081008

• Start-up Supply Current: 1mA
• Operating Supply Voltage (min): -0.3V
• Operating Supply Voltage (max): 17V
• Operating Temp Range: -25C to 125C
• Operating Temperature Classification: Commercial
• Package Type: DSO
• Pin Count: 14
• Mounting: Surface Mount
• Lead Free Status / RoHS Status: Compliant

Edition 07.03
Published by Infineon Technologies AG
St.-Martin-Strasse 53
D-81541 München
©
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as warranted characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and
charts stated herein.
Infineon Technologiesis an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office
in Germany or our Infineon Technologies Representatives worldwide.
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in question please contact
your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Tech-
nologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect
the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to
support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other
persons may be endangered.
TDA 16846/TDA 16846-2/TDA 16847/TDA 16847
Revision History:
Previous Version Data Sheet TDA 16846: 2000-01-14
Previous Version Data Sheet TDA 16846-2: 2002-07-30
Page
(in previous
Version)
20
21
22
23
TDA 16846-2/TDA 16847-2:
Improvements of TDA 16846-2/TDA16847-2 compared with TDA 16846/TDA16847
Pin 5
Pin 7
Pin 11
Pin 13
Pin 14
Infineon Technologies AG 2003
Page
(in current
Version)
20
21
22
23
OCI
SYN
PVC
OUT
VCC
Subjects (major changes since last revision)
The data sheets for TDA 16846 and TDA 16846-2 have been
combined in this version. Some measuring values are updated:
Pin 1 basic value 1
Pin 2 discharge current
Pin 14 overvoltage
Pin 3 delay to switch on
Pin 4 charge current
Pull high resistor
to the data sheet for TDA 16846.
Pin 7 charge current
Pin 13 rise and fall time adapted according to
V
Expanded input voltage range down to zero, series resistor between
pin 5 and ground is no longer necessary.
Improved startup to prevent the transformer from saturation also in
fixed frequency and synchronized mode.
Noise-immunity improved by spike blanking.
Reduced output voltage level for off state.
Noise-immunity improved by spike blanking.
13aclow
Current Version: 2003-07-31
slightly decreased (only TDA 16846-2, TDA 16847-2).
R
1min
V
V
14OVmax
I
I
1B1
7 min
4ch
changed from 18kOhm to 15 kOhm according
I
t
2DC min
and
3d
and discharge current
and upper threshold
slightly decreased.
threshold changed from 17.0 V to 17.1 V.
V
1B2
changed from 0.5 mA to 0.6 mA.
slightly changed.
C
V
13
I
4DCH
7Hmin
= 1nF (prev. 10 nF).
added.
small changed.