VV6411C036 STMicroelectronics, VV6411C036 Datasheet - Page 17

• Manufacturer Part Number: VV6411C036
• Manufacturer: STMicroelectronics
• Type: CMOSr

Specifications of VV6411C036

• Sensor Image Color Type: Color
• Sensor Image Size Range: 30,720 to 250,920Pixels
• Operating Supply Voltage (typ): 3.3V
• Operating Temp Range: 0C to 40C
• Package Type: CLCC
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 36
• Lead Free Status / RoHS Status: Supplier Unconfirmed

STV0680B + VV6444/6410/6500
3.2
3.3
3.3.1
3.3.2
Modes available (STV0680B-003)
Description of modes
Note that certain modes are only available using STV0680B-003, and with appropriate hardware
fitted on the camera.
Standby mode (untethered) and Wake-up
On power-up, or wake-up from untethered standby mode, (i.e. by pressing the Mode button), the
camera will beep twice. The LCD will briefly indicate the camera resolution either ‘Hr.’ for high
resolution (80 CIF or 26 VGA images - using 64Mbit memory) or ‘Lr’ for low resolution (322 QCIF or
107 VGA images - using 64Mbit memory) and then display the number of pictures which may be
taken. Please note that in Low Resolution Mode, although there can be up to 322 images available,
the LCD counter will only go up to 99, it will continue reporting 99 until there are less than 99 images
left.
The camera will go back to standby mode either after 30 seconds of inactivity, LED1 will turn off and
the LCD will go blank. This can also be done (STV0680B-003 only) by pressing the mode switch for
more than 2 seconds.
Normal mode
Pressing the shutter button will take a picture. The camera will beep. A high pitched beep indicates
that the picture was taken successfully and the counter will decrement (if there are less than 99
images left to take). A low beep indicates insufficient light to take a picture. A series of beeps
indicates that the camera is full.
Delete Last: dA / dP / dC
Continuous Capture: Ct
Audio Playback: AP
Resolution: Hr / Lr
Audio Record: Ar
Normal: 20 / 80
Self-Timer: St
Clear All: CL
Figure 4 : STV0680B-003modes (CIF camera with 16Mbit SDRAM assumed)
Notes:
1. Audio Record only available if audio hardware is fitted
2. Audio Playback only available once an audio clip has been recorded
3. Delete Last displays (only available if audio hardware fitted)
The mode is inhibited if the camera is empty.
4. Continuous Capture mode is inhibited when the flashgun is enabled
(SW6 down)
dA - if the last object is an audio clip
dP - if the last object is a picture
dC - if the last object is a continuous capture clip
Standby mode (untethered)
Version 3.4
After 30sec of inactivity
Press Mode button
Camera modes of operation
17/63