ICM7555CN,602 NXP Semiconductors, ICM7555CN,602 Datasheet - Page 13

• Manufacturer Part Number: ICM7555CN,602
• Description: IC CMOS TIMER GEN-PURPOSE 8-DIP
• Manufacturer: NXP Semiconductors
• Type: 555 Type, Timer/Oscillator (Single)r

Specifications of ICM7555CN,602

• Frequency: 500kHz
• Voltage - Supply: 3 V ~ 16 V
• Current - Supply: 180µA
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 8-DIP (0.300", 7.62mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Count: -
• Other names: 568-1191-5; 933975600602; ICM7555CN

NXP Semiconductors
ICM7555_2
Product data sheet
11.6 Control voltage
11.7 RESET
The CONTROL_VOLTAGE terminal permits the two trip voltages for the THRESHOLD
and TRIGGER internal comparators to be controlled. This provides the possibility of
oscillation frequency modulation in the astable mode, or even inhibition of oscillation,
depending on the applied voltage. In the monostable mode, delay times can be changed
by varying the applied voltage to the CONTROL_VOLTAGE pin.
The RESET terminal is designed to have essentially the same trip voltage as the standard
NE/SE555 device, i.e., 0.6 V to 0.7 V. At all supply voltages it represents an extremely
high input impedance. The mode of operation of the RESET function is, however, much
improved over the standard NE/SE555 device in that it controls only the internal flip-flop,
which in turn controls simultaneously the state of the OUTPUT and DISCHARGE pins.
This avoids the multiple threshold problems sometimes encountered with slow falling
edges in the NE/SE555 devices.
Fig 16. Monostable operation
V
DD
18 V; t = 1.05 R
Rev. 02 — 3 August 2009
A
1
2
3
4
C
GND
TRIGGER
OUTPUT
RESET
CONTROL_VOLTAGE
THRESHOLD
DISCHARGE
V
DD
8
7
6
5
V
General purpose CMOS timer
DD
optional
capacitor
R A
002aae419
© NXP B.V. 2009. All rights reserved.
ICM7555
C
13 of 22