EPF10K10ATI144-3 Altera, EPF10K10ATI144-3 Datasheet - Page 124

• Manufacturer Part Number: EPF10K10ATI144-3
• Description: IC FLEX 10KA FPGA 10K 144-TQFP
• Manufacturer: Altera
• Series: FLEX-10K®r

Specifications of EPF10K10ATI144-3

• Number Of Logic Elements/cells: 576
• Number Of Labs/clbs: 72
• Total Ram Bits: 6144
• Number Of I /o: 102
• Number Of Gates: 31000
• Voltage - Supply: 3 V ~ 3.6 V
• Mounting Type: Surface Mount
• Operating Temperature: -40°C ~ 100°C
• Package / Case: 144-TQFP, 144-VQFP
• Family Name: FLEX 10KA
• Number Of Usable Gates: 10000
• Number Of Logic Blocks/elements: 576
• # Registers: 450
• # I/os (max): 102
• Frequency (max): 125MHz
• Process Technology: CMOS
• Operating Supply Voltage (typ): 3.3V
• Logic Cells: 576
• Ram Bits: 6144
• Device System Gates: 31000
• Operating Supply Voltage (min): 3V
• Operating Supply Voltage (max): 3.6V
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 144
• Package Type: TQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 544-1936; EPF10K10ATI144-3

Configuration &
Operation
124
FLEX 10K Embedded Programmable Logic Device Family Data Sheet
f
Figure 32. I
The FLEX 10K architecture supports several configuration schemes. This
section summarizes the device operating modes and available device
configuration schemes.
See Application Note 116 (Configuring APEX 20K, FLEX 10K & FLEX 6000
Devices) for detailed descriptions of device configuration options, device
configuration pins, and for information on configuring FLEX 10K devices,
including sample schematics, timing diagrams, and configuration
parameters.
Operating Modes
The FLEX 10K architecture uses SRAM configuration elements that
require configuration data to be loaded every time the circuit powers up.
The process of physically loading the SRAM data into the device is called
configuration. Before configuration, as VCC rises, the device initiates a
Power-On Reset (POR). This POR event clears the device and prepares it
for configuration. The FLEX 10K POR time does not exceed 50 s.
During initialization, which occurs immediately after configuration, the
device resets registers, enables I/O pins, and begins to operate as a logic
device. The I/O pins are tri-stated during power-up, and before and
during configuration. Together, the configuration and initialization
processes are called command mode; normal device operation is called user
mode.
CCACTIVE
EPF10K250A
I
Current (mA)
CC
Supply
vs. Operating Frequency (Part 3 of 3)
3,500
3,000
2,500
2,000
1,500
1,000
500
0
20
Frequency (MHz)
40
60
80
Altera Corporation
100