EZ80L92AZ050SC Zilog, EZ80L92AZ050SC Datasheet - Page 136

• Manufacturer Part Number: EZ80L92AZ050SC
• Description: IC WEBSERVER 50MHZ 100LQFP
• Manufacturer: Zilog

Specifications of EZ80L92AZ050SC

• Processor Type: eZ80
• Features: High Speed, Single-Cycle Instruction-Fetch
• Speed: 50MHz
• Voltage: 3.3V
• Mounting Type: Surface Mount
• Package / Case: 100-LQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 269-3170; EZ80L92AZ050SC

eZ80L92 MCU
Product Specification
130
Serial Clock
The Serial Clock (SCK) is used to synchronize data movement both in and out of the
device through its MOSI and MISO pins. The master and slave are capable of exchanging
a data byte during a sequence of eight clock cycles. As SCK is generated by the master,
the SCK pin becomes an input on a slave device. The SPI contains an internal divide-by-
two clock divider. In MASTER mode, the SPI serial clock is one-half the frequency of the
clock signal created by the SPI’s Baud Rate Generator.
As demonstrated in
Figure 29
and
Table
68, four possible timing relations may be chosen
by using control bits CPOL and CPHA in the SPI Control register. See the
SPI Control
Register (SPI_CTL) on page
135. Both the master and slave must operate with the identi-
cal timing, Clock Polarity (CPOL), and Clock Polarity (CPHA). The master device always
places data on the MOSI line a half-cycle before the clock edge (SCK signal), in order for
the slave device to latch the data.
PS013014-0107
Serial Peripheral Interface