LM4546BVHX/NOPB National Semiconductor, LM4546BVHX/NOPB Datasheet - Page 26

• Manufacturer Part Number: LM4546BVHX/NOPB
• Description: IC AUDIO CODEC 2MULTICH 48-LQFP
• Manufacturer: National Semiconductor
• Type: Audio Codec '97r

Specifications of LM4546BVHX/NOPB

• Data Interface: Serial
• Resolution (bits): 18 b
• Number Of Adcs / Dacs: 2 / 2
• Sigma Delta: Yes
• Dynamic Range, Adcs / Dacs (db) Typ: 90 / 89
• Voltage - Supply, Analog: 4.2 V ~ 5.5 V
• Voltage - Supply, Digital: 3 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 48-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: LM4546BVHX

www.national.com
Multiple Codecs
Test Modes
AC ’97 Rev 2.1 defines two test modes: ATE test mode and
Vendor test mode. Cold Reset is the only way to exit either of
them. The ATE test mode is activated if SDATA_OUT is
sampled high by the trailing edge (zero-to-one transition) of
RESET#. In ATE test mode the codec AC Link outputs
SDATA_IN and BIT_CLK are then configured to a high im-
pedance state to allow tester control of the AC Link interface
(Continued)
FIGURE 9. Multiple Codecs using Extended AC Link
26
for controller testing. ATE test mode timing parameters are
given in the Electrical Characteristics table. The Vendor test
mode is entered if SYNC is sampled high by the zero-to-one
transition of RESET#. Neither of these entry conditions can
occur in normal AC Link operation but care must be taken to
avoid mistaken activation of the test modes when using non
standard controllers.
20123323