CP2201-GM Silicon Laboratories Inc, CP2201-GM Datasheet - Page 106

• Manufacturer Part Number: CP2201-GM
• Description: IC ETH CTRLR SNGL-CHIP 28QFN
• Manufacturer: Silicon Laboratories Inc

Specifications of CP2201-GM

• Package / Case: 48-TQFP, 48-VQFP
• Controller Type: Ethernet Controller, MAC/10Base-T
• Interface: Parallel/Serial
• Voltage - Supply: 3.1 V ~ 3.6 V
• Current - Supply: 75mA
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Ethernet Connection Type: 1000BASE-T or 100BASE-T or 10BASE-T
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Product: Ethernet Controllers
• Standard Supported: IEEE 802.3
• Data Rate: 10 Mbps or 100 Mbps or 1000 Mbps
• Maximum Operating Temperature: + 85 C
• No. Of Ports: 1
• Ethernet Type: IEEE 802.3
• Interface Type: Parallel
• Supply Current: 60mA
• Supply Voltage Range: 3.1V To 3.6V
• Operating Temperature Range: -40°C To +85°C
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 336-1326 - KIT REF DESIGN PWR OVER ETHERNET336-1316 - KIT EVAL FOR CP2201 ETH CTRLR
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1313

CP2200/1
D
Revision 0.4 to Revision 0.41
Revision 0.41 to Revision 1.0
106
OCUMENT
Modified Figure 2, “Typical Connection Diagram (Non-Multiplexed),” on page 6 and Figure 3, “Typical
Connection Diagram (Multiplexed),” on page 7 for improved EMI emmissions and common mode stability.
Added Maximum Supply Current specification in Table 2 on page 9.
Updated the maximum XTAL1 Input Low Voltage specification from 0.8 to 0.7 V (see Table 8 on page 20).
Updated the maximum RST Input Pullup Current specification from 40 to 50 µA (see Table 13 on page 42).
Updated the Non-Multiplexed EMIF address hold time from 20 to 30 ns and the T
60 ns. Note that the T
will not be required in most applications. See Section 16 on page 96.
Added a Revision-Specific Behavior chapter. See Section 17 on page 104.
Removed text indicating that all packets on the wire can be received and buffered by the CP220x.
C
HANGE
hold
specification is unchanged from its value of 60 ns; therefore, changes to host timing
L
IST
Rev. 1.0
vd2
specification from 40 to