CP2201-GM Silicon Laboratories Inc, CP2201-GM Datasheet - Page 36

• Manufacturer Part Number: CP2201-GM
• Description: IC ETH CTRLR SNGL-CHIP 28QFN
• Manufacturer: Silicon Laboratories Inc

Specifications of CP2201-GM

• Package / Case: 48-TQFP, 48-VQFP
• Controller Type: Ethernet Controller, MAC/10Base-T
• Interface: Parallel/Serial
• Voltage - Supply: 3.1 V ~ 3.6 V
• Current - Supply: 75mA
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Ethernet Connection Type: 1000BASE-T or 100BASE-T or 10BASE-T
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Product: Ethernet Controllers
• Standard Supported: IEEE 802.3
• Data Rate: 10 Mbps or 100 Mbps or 1000 Mbps
• Maximum Operating Temperature: + 85 C
• No. Of Ports: 1
• Ethernet Type: IEEE 802.3
• Interface Type: Parallel
• Supply Current: 60mA
• Supply Voltage Range: 3.1V To 3.6V
• Operating Temperature Range: -40°C To +85°C
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 336-1326 - KIT REF DESIGN PWR OVER ETHERNET336-1316 - KIT EVAL FOR CP2201 ETH CTRLR
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1313

CP2200/1
36
Bits 7–6: UNUSED. Read = 00b, Write = don’t care.
Bit 5:
Bit 4:
Bit 3:
Bit 2:
Bit 1:
Bit 0:
R/W
Bit7
—
EWAKEINT: Enable “Wake-on-Lan” Interrupt
0: Disable “Wake-on-Lan” Interrupt.
1: Enable “Wake-on-Lan” Interrupt.
ELINKINT: Enable Link Status Changed Interrupt
0: Disable Link Status Changed Interrupt.
1: Enable Link Status Changed Interrupt.
EJABINT: Enable Jabber Detected Interrupt
0: Disable Jabber Detected Interrupt.
1: Enable Jabber Detected Interrupt.
EANFINT: Enable Auto-Negotiation Failed Interrupt
0: Disable Auto-Negotiation Failed Interrupt.
1: Enable Auto-Negotiation Failed Interrupt.
Reserved: Read = 0b. Must write 0b.
EANCINT: Enable Auto-Negotiation Complete Interrupt
0: Disable Auto-Negotiation Complete Interrupt.
1: Enable Auto-Negotiation Complete Interrupt.
R/W
Bit6
—
EWAKEINT ELINKINT EJABINT EANFINT Reserved EANCINT 00000000
Register 10. INT1EN: Interrupt Enable Register 1
R/W
Bit5
R/W
Bit4
R/W
Bit3
Rev. 1.0
R/W
Bit2
R/W
Bit1
R/W
Bit0
Reset Value
Address:
0x7D