PIC16F1827-I/P Microchip Technology Inc., PIC16F1827-I/P Datasheet - Page 229

• Manufacturer Part Number: PIC16F1827-I/P
• Description: 18 PDIP .300in TUBE, 7 KB Flash, 384 bytes RAM, 32 MHz Int. Osc, 16 I/0, Enhance
• Manufacturer: Microchip Technology Inc.

Specifications of PIC16F1827-I/P

• A/d Inputs: 12-Channel, 10-Bit
• Comparators: 2
• Cpu Speed: 8 MIPS
• Eeprom Memory: 256 Bytes
• Input Output: 16
• Interface: I2C/SPI/UART/USART
• Memory Type: Flash
• Number Of Bits: 8
• Package Type: 18-pin PDIP
• Programmable Memory: 7K Bytes
• Ram Size: 384 Bytes
• Speed: 32 MHz
• Temperature Range: –40 to 125 °C
• Timers: 4-8-bit, 1-16-bit
• Voltage, Range: 1.8-5.5 V
• Standby Current (pic16lf182x): 30 nA @ 1.8 V, Typical
• Lead Free Status / Rohs Status: RoHS Compliant part

REGISTER 24-4:
 2011 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
bit 7
bit 6-0
Note 1:
PxRSEN
R/W-0/0
Bit resets to ‘0’ with Two-Speed Start-up and LP, XT or HS selected as the Oscillator mode or Fail-Safe
mode is enabled.
PxRSEN: PWM Restart Enable bit
1 = Upon auto-shutdown, the CCPxASE bit clears automatically once the shutdown event goes away;
0 = Upon auto-shutdown, CCPxASE must be cleared in software to restart the PWM
PxDC<6:0>: PWM Delay Count bits
PxDCx =Number of F
R/W-0/0
the PWM restarts automatically
PWMxCON: ENHANCED PWM CONTROL REGISTER
transition active and the actual time it transitions active
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
R/W-0/0
OSC
/4 (4 * T
R/W-0/0
OSC
) cycles between the scheduled time when a PWM signal should
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
PxDC<6:0>
R/W-0/0
PIC16(L)F1826/27
R/W-0/0
R/W-0/0
DS41391D-page 229
R/W-0/0
bit 0