PIC16F1827-I/P Microchip Technology Inc., PIC16F1827-I/P Datasheet - Page 331

• Manufacturer Part Number: PIC16F1827-I/P
• Description: 18 PDIP .300in TUBE, 7 KB Flash, 384 bytes RAM, 32 MHz Int. Osc, 16 I/0, Enhance
• Manufacturer: Microchip Technology Inc.

Specifications of PIC16F1827-I/P

• A/d Inputs: 12-Channel, 10-Bit
• Comparators: 2
• Cpu Speed: 8 MIPS
• Eeprom Memory: 256 Bytes
• Input Output: 16
• Interface: I2C/SPI/UART/USART
• Memory Type: Flash
• Number Of Bits: 8
• Package Type: 18-pin PDIP
• Programmable Memory: 7K Bytes
• Ram Size: 384 Bytes
• Speed: 32 MHz
• Temperature Range: –40 to 125 °C
• Timers: 4-8-bit, 1-16-bit
• Voltage, Range: 1.8-5.5 V
• Standby Current (pic16lf182x): 30 nA @ 1.8 V, Typical
• Lead Free Status / Rohs Status: RoHS Compliant part

CALL
Syntax:
Operands:
Operation:
Status Affected:
Description:
CALLW
Syntax:
Operands:
Operation:
Status Affected:
Description:
CLRF
Syntax:
Operands:
Operation:
Status Affected:
Description:
CLRW
Syntax:
Operands:
Operation:
Status Affected:
Description:
 2011 Microchip Technology Inc.
Call Subroutine
[ label ] CALL k
0  k  2047
(PC)+ 1 TOS,
k  PC<10:0>,
(PCLATH<6:3>)  PC<14:11>
None
Call Subroutine. First, return address
(PC + 1) is pushed onto the stack.
The eleven-bit immediate address is
loaded into PC bits <10:0>. The upper
bits of the PC are loaded from
PCLATH. CALL is a two-cycle instruc-
tion.
Clear W
[ label ] CLRW
None
00h  (W)
1  Z
Z
W register is cleared. Zero bit (Z) is
set.
[ label ] CALLW
(PC) +1  TOS,
(W)  PC<7:0>,
(PCLATH<6:0>) PC<14:8>
Subroutine call with W. First, the
return address (PC + 1) is pushed
onto the return stack. Then, the con-
tents of W is loaded into PC<7:0>,
and the contents of PCLATH into
PC<14:8>. CALLW is a two-cycle
instruction.
Subroutine Call With W
None
None
Clear f
[ label ] CLRF
0  f  127
00h  (f)
1  Z
Z
The contents of register ‘f’ are cleared
and the Z bit is set.
f
CLRWDT
Syntax:
Operands:
Operation:
Status Affected:
Description:
COMF
Syntax:
Operands:
Operation:
Status Affected:
Description:
DECF
Syntax:
Operands:
Operation:
Status Affected:
Description:
PIC16(L)F1826/27
Complement f
[ label ] COMF
0  f  127
d  [0,1]
(f)  (destination)
Z
The contents of register ‘f’ are com-
plemented. If ‘d’ is ‘0’, the result is
stored in W. If ‘d’ is ‘1’, the result is
stored back in register ‘f’.
Decrement f
[ label ] DECF f,d
0  f  127
d  [0,1]
(f) - 1  (destination)
Z
result is stored in the W
register. If ‘d’ is ‘1’, the result is stored
back in register ‘f’.
Clear Watchdog Timer
[ label ] CLRWDT
None
00h  WDT
0  WDT prescaler,
1  TO
1  PD
TO, PD
CLRWDT instruction resets the Watch-
dog Timer. It also resets the prescaler
of the WDT.
Status bits TO and PD are set.
Decrement register ‘f’. If ‘d’ is ‘0’, the
f,d
DS41391D-page 331