PIC16LF1827-E/SO Microchip Technology Inc., PIC16LF1827-E/SO Datasheet - Page 198

• Manufacturer Part Number: PIC16LF1827-E/SO
• Description: 18 PIN, 7 KB FLASH, 384 BYTES RAM, 32 MHZ INT. OSC, 16 I/0, ENHANCED MID RANGE C
• Manufacturer: Microchip Technology Inc.

Specifications of PIC16LF1827-E/SO

• A/d Inputs: 12-Channel, 10-Bit
• Comparators: 2
• Cpu Speed: 8 MIPS
• Eeprom Memory: 256 Bytes
• Input Output: 16
• Interface: I2C/SPI/UART/USART
• Memory Type: Flash
• Number Of Bits: 8
• Package Type: 18-pin SOIC
• Programmable Memory: 7K Bytes
• Ram Size: 384 Bytes
• Speed: 32 MHz
• Temperature Range: –40 to 125 °C
• Timers: 4-8-bit, 1-16-bit
• Voltage, Range: 1.8-5.5 V
• Lead Free Status / Rohs Status: RoHS Compliant part

PIC16(L)F1826/27
REGISTER 23-1:
DS41391D-page 198
bit 7
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2-1
bit 0
Note 1:
R/W-0/0
MDEN
2:
The modulated output frequency can be greater and asynchronous from the clock that updates this
register bit, the bit value may not be valid for higher speed modulator or carrier signals.
MDBIT must be selected as the modulation source in the MDSRC register for this operation.
MDEN: Modulator Module Enable bit
1 = Modulator module is enabled and mixing input signals
0 = Modulator module is disabled and has no output
MDOE: Modulator Module Pin Output Enable bit
1 = Modulator pin output enabled
0 = Modulator pin output disabled
MDSLR: MDOUT Pin Slew Rate Limiting bit
1 = MDOUT pin slew rate limiting enabled
0 = MDOUT pin slew rate limiting disabled
MDOPOL: Modulator Output Polarity Select bit
1 = Modulator output signal is inverted
0 = Modulator output signal is not inverted
MDOUT: Modulator Output bit
Displays the current output value of the modulator module.
Unimplemented: Read as ‘0’
MDBIT: Allows software to manually set modulation source input to module
1 = Modulator uses High Carrier source
0 = Modulator uses Low Carrier source
R/W-0/0
MDOE
MDCON: MODULATION CONTROL REGISTER
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
R/W-1/1
MDSLR
MDOPOL
R/W-0/0
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
MDOUT
R-0/0
(1)
U-0
—
 2011 Microchip Technology Inc.
(2)
U-0
—
R/W-0/0
MDBIT
bit 0