PIC16LF1827-E/SO Microchip Technology Inc., PIC16LF1827-E/SO Datasheet - Page 90

• Manufacturer Part Number: PIC16LF1827-E/SO
• Description: 18 PIN, 7 KB FLASH, 384 BYTES RAM, 32 MHZ INT. OSC, 16 I/0, ENHANCED MID RANGE C
• Manufacturer: Microchip Technology Inc.

Specifications of PIC16LF1827-E/SO

• A/d Inputs: 12-Channel, 10-Bit
• Comparators: 2
• Cpu Speed: 8 MIPS
• Eeprom Memory: 256 Bytes
• Input Output: 16
• Interface: I2C/SPI/UART/USART
• Memory Type: Flash
• Number Of Bits: 8
• Package Type: 18-pin SOIC
• Programmable Memory: 7K Bytes
• Ram Size: 384 Bytes
• Speed: 32 MHz
• Temperature Range: –40 to 125 °C
• Timers: 4-8-bit, 1-16-bit
• Voltage, Range: 1.8-5.5 V
• Lead Free Status / Rohs Status: RoHS Compliant part

PIC16(L)F1826/27
8.6.5
The PIE4 register contains the interrupt enable bits, as
shown in
REGISTER 8-5:
DS41391D-page 90
bit 7
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
bit 7-2
bit 1
bit 0
Note 1:
U-0
—
Register
This register is only available on PIC16(L)F1827.
PIE4 REGISTER
Unimplemented: Read as ‘0’
BCL2IE: MSSP2 Bus Collision Interrupt Enable bit
1 = Enables the MSSP2 Bus Collision Interrupt
0 = Disables the MSSP2 Bus Collision Interrupt
SSP2IE: Master Synchronous Serial Port 2 (MSSP2) Interrupt Enable bit
1 = Enables the MSSP2 interrupt
0 = Disables the MSSP2 interrupt
8-5.
U-0
—
PIE4: PERIPHERAL INTERRUPT ENABLE REGISTER 4
(1)
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U-0
—
U-0
—
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
U-0
—
Note 1: The PIE4 register is available only on the
2: Bit PEIE of the INTCON register must be
PIC16(L)F1827 device.
set to enable any peripheral interrupt.
U-0
—
 2011 Microchip Technology Inc.
(1)
R/W-0/0
BCL2IE
R/W-0/0
SSP2IE
bit 0